EMCPII+ for Gas Engines Caterpillar


Programmable Spare Output

Usage:

G3306 07Y
备用输出会对选择的触发条件作出响应。 响应是高或低。 响应和触发条件可编程。

GSC+ 备用输出响应必须设定高激活或低激活状态(设定点 SP13)。 输出激活时,低激活状态将输出引向蓄电池负极。 当输出处于低状态时,输出吸收最大 100 毫安的电流。 备用输出上没有连接设备时,激活高大约为 5.0 DCV。 备用输出可以驱动高阻抗逻辑电路(最小 36 000 欧姆)。 备用输出不会驱动低阻抗负载,如继电器。

设定点SP14必须设定到能触发备用输出到激活状态的条件。 可以打开备用输出的可能触发条件,列在了系统操作, "备用输入/输出设定点 OP6"中的列表中。

输出设定点设定的更多信息,参见系统操作, "备用输入/输出设定 OP6"。

注: 在发动机冷却时使用备用输出来打开AC 电路断路器的励磁脱扣线圈是正常的。

注: GSC+诊断备用输出电路中的一个故障。 参见测试和调整, "CID 334备用输出"。

Caterpillar Information System:

CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Recoil Spring
EMCPII+ for Gas Engines Programmable Kilowatt Level Output
Electronic Modular Control Panel II+ (EMCP II+) Hourmeter Programming OP7
EMCPII+ for Gas Engines Fault Log Viewing OP1
EMCPII+ for Gas Engines Fault Log Clearing OP4
Electronic Modular Control Panel II+ (EMCP II+) Fault Description
EMCPII+ for Gas Engines Engine/Generator Setpoint Viewing OP2-0
EMCPII+ for Gas Engines Engine Setpoint Verification OP9
EMCPII+ for Gas Engines Diagnostic Codes
EMCPII+ for Gas Engines Customer Interface Module
EMCPII+ for Gas Engines Alarm Modules
EMCPII+ for Gas Engines Alarm Module Control (Custom)
EMCPII+ for Gas Engines Programmable Spare Relay Outputs
EMCPII+ for Gas Engines Protective Relaying Setpoint Viewing OP2-1
EMCPII+ for Gas Engines Relay Driver Module
EMCPII+ for Gas Engines SP Fault Codes
Electronic Modular Control Panel II+ (EMCP II+) Shutdown Mode - For MUI Engines
Electronic Modular Control Panel II+ (EMCP II+) System Communication Module (Customer)
EMCPII+ for Gas Engines Voltmeter/Ammeter Programming OP8
3054 and 3056 Industrial and Generator Set Engines Balancer Group - If Equipped
3408E and 3412E Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble - One-Piece Piston
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Track Roller (Single Flange)
G3500 Engines Turbocharger - Install
3116 Truck Engine Safety Signs and Labels
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.