Turbocharger
Turbocharger Model S41
Show/hide table
Illustration 1 | g00497640 |
(1) Apply 5P-3931 Anti-Seize Compound on the bearing surface and the bolt threads before assembly. Tighten the bolts to the following torque. ... 55 ± 5 N·m (41 ± 4 lb ft)
Show/hide table
Illustration 2 | g00497661 |
(2) V-band clamps
- Tighten the V-band clamps to the following torque. ... 14 ± 1 N·m (10 ± 1 lb ft)
- Gently hit around the V-band clamp with a soft faced hammer. Again tighten the V-band clamps to the following torque. ... 14 ± 1 N·m (10 ± 1 lb ft)
Turbocharger Model TW91
Show/hide table
Illustration 3 | g00497674 |
(1) Impeller
- In order to install the impeller, the impeller must be at room temperature. Apply a thin coat of oil to the threads and the impeller face. Tighten the nut to the following torque in order to seat the impeller. ... 31 ± 1.5 N·m (23 ± 1.11 lb ft)
- Loosen the nut. Again tighten the nut to the following torque. ... 5 ± 2 N·m (44 ± 18 lb in)
- Additionally tighten the nut by the following value. ... 135 ± 5 degrees
- Loosen the nut. Apply 4C-9507 Retaining Compound to the nut. Again tighten the nut to the following torque. ... 5 ± 2 N·m (44 ± 18 lb in)
- Additionally tighten the nut by the following value. ... 135 ± 5 degrees
- Loosen the nut. Again tighten the nut to the following torque. ... 5 ± 2 N·m (44 ± 18 lb in)
(2) V-band clamps
- Tighten the V-band clamps to the following torque. ... 14 ± 1.5 N·m (10 ± 1.11 lb ft)
- Gently hit around the V-band clamp with a soft faced hammer. Again tighten the V-band clamps to the following torque. ... 14 ± 1.5 N·m (10 ± 1.11 lb ft)
(3) Tighten the 8 bolts to the following torque. ... 39 ± 2 N·m (29 ± 1 lb ft)
Apply 5P-3931 Anti-Seize Compound on the washer face and the bolt threads of the exhaust manifold before assembly. Tighten the bolts and nuts that hold the turbocharger to the exhaust manifold to the following torque. ... 55 ± 5 N·m (41 ± 4 lb ft)
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
3306C Engines for Caterpillar Built Machines Cylinder Liner Projection
Gas Engine Driven Chiller Driveline Product Information
3406E Truck Engines Air Inlet Elbow
3306C Engines for Caterpillar Built Machines Main Bearing Journal
3306C Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
3406C (PEEC III) Truck Engine Flywheel
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3412E and C30 Engines Cylinder Head
3406E Truck Engines Accessory Drive
3306C Engines for Caterpillar Built Machines Piston Cooling Jet
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Solenoid Valve (Air Horn)
3406E and 3456 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
3406E On-Highway Engine Turbocharger - Install
3408C, 3412C and 3412D High Performance Marine Engines Vibration Damper and Pulley
3306B Industrial Engine Piston and Rings
3412E and C30 Engines Aftercooler
3406E Truck Engines Turbocharger
3406E Truck Engine Troubleshooting
3600 Heavy Fuel Engines Daily Performance Log
G3304 and G3306 Engines Crankshaft Pulley
3306C Engines for Caterpillar Built Machines Vibration Damper
3406E On-Highway Engine Water Pump - Remove