Pistons and Connecting Rods - Assemble
组装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 7S-9470     | 活塞环扩展器     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 用适当的工具或 1U-8811 清洁剂 清洁使用过的活塞的凹槽。
- 安装连杆盖轴承。 确保连杆盖轴承背面的凸键处于连杆和连杆盖的凸键凹槽中。
- 将连杆 (2) 安装到活塞上。 确保轴承凸键开槽 (3) 和识别标记与活塞顶部的 "V" 标记在同一侧。
Show/hide table
图 1 | g00486509 |
- 使用清洁的发动机机油润滑活塞销 (1) ,然后将活塞销 (1) 穿过活塞和连杆安装。 将挡圈 (4) 安装到活塞销末端。
- 用工具 (A) 将控油环安装到活塞上。
注: 装配时,控油环的弹簧端应与环两端缝隙成 180 度。 从环两端缝隙中必须能够看见弹簧的蓝色部分。
Show/hide table
图 2 | g00484932 |
- 使用工具 (A) 安装中间环,并且标有 "UP-2" 字样的一侧朝向活塞顶部。
- 使用工具 (A) 安装顶环,并且标有 "UP-1" 字样的一侧朝向活塞顶部。
注: 中间环与顶环的两端缝隙应分开 120 度。
End By: 安装活塞和连杆。 请参考 解体与组装, "活塞和连杆 - 安装"。
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
3306C Engines for Caterpillar Built Machines Cylinder Liner Projection
Gas Engine Driven Chiller Driveline Product Information
3406E Truck Engines Air Inlet Elbow
3306C Engines for Caterpillar Built Machines Main Bearing Journal
3306C Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
3406C (PEEC III) Truck Engine Flywheel
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3412E and C30 Engines Cylinder Head
3406E Truck Engines Accessory Drive
3306C Engines for Caterpillar Built Machines Piston Cooling Jet
G3606 and G3608 Engines Governor Type
3412E and C30 Engines Turbocharger
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Solenoid Valve (Air Horn)
3406E and 3456 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
3406E On-Highway Engine Turbocharger - Install
3408C, 3412C and 3412D High Performance Marine Engines Vibration Damper and Pulley
3306B Industrial Engine Piston and Rings
3412E and C30 Engines Aftercooler
3406E Truck Engines Turbocharger
3406E Truck Engine Troubleshooting
3600 Heavy Fuel Engines Daily Performance Log
G3304 and G3306 Engines Crankshaft Pulley
3306C Engines for Caterpillar Built Machines Vibration Damper