Pistons and Connecting Rods - Disassemble
解体步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 7S-9470     | 活塞环扩展器     | 1     |
B     | 5P-8639     | 压力机总成     | 1     |
5P-8645 | 接头     | 1     | |
6V-3029 | 隔套     | 1     | |
6V-2049 | 接头     | 1     | |
1U-5230 | 手动液压泵     | 1     | |
8F-0024 | 软管     | 1     | |
1P-2375 | 连接器     | 1     | |
1P-2376 | 连接器     | 1     |
开始:
- 拆卸活塞和连杆。 请参考解体及组装, "活塞和连杆 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (A) 从活塞上拆下活塞环。
Show/hide table
图 1 | g00484932 |
- 拆卸挡圈 (3) 、活塞销 (1) 和连杆 (2) 。
Show/hide table
图 2 | g00484980 |
- 拆卸连杆轴承。
- 将连杆在微波炉中加热至温度 176 至 260 °C(350 至 500 °F)。 不要用明火来加热连杆。
- 将 6V-3029 隔套 (11) 放入底座中。 将连杆放置在工具 (B) 的底座上。
Show/hide table
图 3 | g00485038 |
Show/hide table
热油和热的部件可能会导致人员受伤。 不要让热的机油和部件接触皮肤。 |
- 将连杆活塞销轴承端放在工具 (B) 的端口组件的中心。 将销 (5) 安装在连杆轴承孔的中心。
- 安装 6V-2049 接头 (9) 。 将接头上的孔与工具 (B) 底座上的孔对准。
- 安装条形卡箍 (10) 和卡箍销 (4) 。
注: 安装新活塞销轴承时需将旧活塞销轴承拆下。
- 用压力机总成将接头 (7) 安装到接头 (11) 上。
- 用工具 (B) 将新活塞销轴承 (6) 推入到连杆中。 将活塞销轴承 (6) 压入到活塞中,直到接头 (8) 与连杆表面接触。
- 从 (B) 上拆下连杆和旧活塞销轴承。
- 安装轴承后,检查活塞销轴承孔径。 正确的内径为 43.210 ± 0.008 mm (1.7012 ± 0.0003 in)。 轴承与活塞销之间的间隙不得大于 0.08 mm (0.003 in)。 请参考专门说明书, SMHS7295了解更多有关拆卸活塞销轴承的信息。
Caterpillar Information System:
3306C Engines for Caterpillar Built Machines Cylinder Liner Projection
Gas Engine Driven Chiller Driveline Product Information
3406E Truck Engines Air Inlet Elbow
3306C Engines for Caterpillar Built Machines Main Bearing Journal
3306C Engines for Caterpillar Built Machines Connecting Rod Bearing Journal
3406C (PEEC III) Truck Engine Flywheel
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3412E and C30 Engines Cylinder Head
3406E Truck Engines Accessory Drive
3306C Engines for Caterpillar Built Machines Piston Cooling Jet
G3606 and G3608 Engines Governor Type
3406E Truck Engine Belt Tensioner
3304B and 3306B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
3412E and C30 Engines Turbocharger
784C and 785C Off-Highway Truck/Tractors Air System and Brakes Solenoid Valve (Air Horn)
3406E and 3456 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
3406E On-Highway Engine Turbocharger - Install
3408C, 3412C and 3412D High Performance Marine Engines Vibration Damper and Pulley
3306B Industrial Engine Piston and Rings
3412E and C30 Engines Aftercooler
3406E Truck Engines Turbocharger
3406E Truck Engine Troubleshooting
3600 Heavy Fuel Engines Daily Performance Log
G3304 and G3306 Engines Crankshaft Pulley