New Hard Washers are Used for the Mounting Hardware on the Oil Scavenge Pump for Certain C175 Off-Highway Truck Engines {1312}
- Off-Highway Truck/Tractor
- 793F (S/N: SND1-133; SSP1-1263; SXP1-103; D3T1-165; RBT1-273)
- 794 AC (S/N: MN51-56; MT51-143)
- 795F AC (S/N: ERM1-300)
- 795FAC XQ (S/N: SNT1-105)
- 797F (S/N: LAJ1-659; WSP1-129; LTZ1-154)
- 794 AC (S/N: MN51-56; MT51-143)
Description Of Change: The washers were changed to provide better inside diameter (ID) fit on the bolts.
The 039-8557 Washer has a smaller ID and will not fit on the shoulder bolts. The 574-4265 Hard Washer has a better fit with improved ID diameter and tolerance for the shoulder bolts.
Adaptable To:
Show/hide table
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
The new and former washers are listed in Table 1.
Show/hide table
Qty | New Part Number | Part Name | Former Part Number |
---|---|---|---|
12 | Washer | ||
2 | Hard Washer |
Show/hide table
(1) | The 16 cylinder engines only require 8 of the |
Show/hide table
Illustration 1 | g06430093 |
(1) (2) |
This change is effective for the engine serial numbers listed in Table 2.
Show/hide table
Effective Engine Serial Numbers |
---|
S/N:4X401008-UP |
S/N:D4W00104-UP |
S/N:J4Y01034-UP |
S/N:K1H01011-UP |
S/N:L4G01025-UP |
S/N:RB201003-UP |
S/N:WLR01029-UP |
Caterpillar Information System:
An Improved Cooling System Venting Procedure is Now Available in the Operation and Maintenance Manual for Certain C175 Off-Highway Truck Engines {0374, 1350} An Improved Cooling System Venting Procedure is Now Available in the Operation and Maintenance Manual for Certain C175 Off-Highway Truck Engines {0374, 1350}
Premature Nose-Cone and King-Pin Wear May Occur on Certain 794, 796, and 798 Off-Highway Trucks {3260, 4314} Premature Nose-Cone and King-Pin Wear May Occur on Certain 794, 796, and 798 Off-Highway Trucks {3260, 4314}
Body May Interfere with Mud Guard at Rear of Left Fender Group {4220, 7252} Body May Interfere with Mud Guard at Rear of Left Fender Group {4220, 7252}
The Hoist Lines Group is Improved on Certain 793D Off-Highway Trucks {5057} The Hoist Lines Group is Improved on Certain 793D Off-Highway Trucks {5057}
776D and 777D Off-Highway Truck/Tractor Tire Inflation - Check
277C, 287C and 297C Multi Terrain Loaders Maintenance Interval Schedule
Diesel Exhaust Fluid (DEF) Pump on Certain C4.4 Engines {108U, 1439} Diesel Exhaust Fluid (DEF) Pump on Certain C4.4 Engines {108U, 1439}
Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562} Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562}
Fenders May Crack on Certain Telehandlers {7252} Fenders May Crack on Certain Telehandlers {7252}
Alternators for C3.4B Engines May Fail on Certain Telehandlers {1405} Alternators for C3.4B Engines May Fail on Certain Telehandlers {1405}
Quick Coupler Harness Receptacle May Pinned Wrong and Quick Coupler Switch May Malfunction on Certain 986K Wheel Loaders {1408} Quick Coupler Harness Receptacle May Pinned Wrong and Quick Coupler Switch May Malfunction on Certain 986K Wheel Loaders {1408}
New Software Version Is Now Available for Certain Cat® MineStar System {7605, 7620} New Software Version Is Now Available for Certain Cat® MineStar System {7605, 7620}
An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713} An Improved Fuel Injector is Now Used on Certain C9.3 Machine Engines {1251, 1254, 1290, 1713}
Identifying Oil Leaks on Certain 3500 Mining Machine Engines {1151, 1348} Identifying Oil Leaks on Certain 3500 Mining Machine Engines {1151, 1348}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161} New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Air Bubbles Can Be Visible on Films Applied on Certain Material Handlers and Wheeled Excavators {7405, 7557} Air Bubbles Can Be Visible on Films Applied on Certain Material Handlers and Wheeled Excavators {7405, 7557}
New Machine Software Groups are Now Used on Certain Telehandlers {7610, 7620} New Machine Software Groups are Now Used on Certain Telehandlers {7610, 7620}
Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265} Governor Pedal Group or Cable Assembly for the Engine May Stick on Certain Backhoe Loaders {1265}
New Engine Software for Certain C7.1 Engines {1920} New Engine Software for Certain C7.1 Engines {1920}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129} Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Payload Harness Grommets Are Now Installed on Certain 700 Series Articulated Trucks {1408, 7150} Payload Harness Grommets Are Now Installed on Certain 700 Series Articulated Trucks {1408, 7150}
A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054} A New Special Instruction Is Now Used to Rework the Weld Crack on A-Pin Doubler Plate for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {0679, 7054}
725C2 and 730C2 Articulated Truck Machine System Sensor - Remove and Install - Payload
521B and 522B Track Feller Bunchers Tilt Platform Stabilizer - Inspect/Adjust