Permanent Fault Logging
When the electronic control module (ECM) generates a diagnostic code, the code will usually be logged in the permanent memory of the ECM.
The ECM has an internal clock which records the operating hours of the ECM. When a diagnostic code is logged, following information is recorded with the code:
- The hour of the first occurrence of the code
- The hour of the last occurrence of the code
- The number of occurrences of the code
If the code is generated more than two times, the ECM does not record the hour of each occurrence. Instead, the ECM records a range for the hours of occurrence. This information is useful for troubleshooting intermittent problems.
Caterpillar electronic service tools are used for the following service procedures:.
- Obtaining information about the logged codes
- Deleting the information from the memory of the ECM
Some diagnostic codes require a factory password in order to be deleted. Diagnostic codes that do not require a factory password will be automatically erased from the memory if the codes do not recur within 100 hours of operation.
Caterpillar Information System:
3126 Truck Engine (Military) Federal Emission Control Warranty
3126E and 3126B Commercial and Truck Engines Water Pump - Inspect
3406E and 3456 Industrial Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
3126E and 3126B Commercial and Truck Engines Severe Service Application - Check
3512 Industrial Engine Diagnostic Flash Code Retrieval
3512 Industrial Engine Diagnostic Lamp
3126E and 3126B Commercial and Truck Engines Air Dryer - Check
3512 Industrial Engine Self-Diagnostics
3126E and 3126B Commercial and Truck Engines Air Compressor Filter - Clean/Replace
3512 Industrial Engine Reference Material
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Housing (Front)
C-10 and C-12 Truck Engines Air Inlet And Exhaust System
3512 Industrial Engine Engine Operation with Active Diagnostic Codes
3126 HEUI Industrial Engine Fuel System
3126 Truck Engine (Military) California Emission Control Warranty Statement
3126 Truck Engine (Military) Emissions Warranty Information
3116 Truck Engine Reference Material
3126E and 3126B Commercial and Truck Engines Engine Protection Plans
3126 Industrial Engine Fuel Filter Lines
3512 Industrial Engine Customer Specified Parameters
3126B Marine Engine Fuel Filter Base
3126 Truck Engine Unit Injector
C-10 and C-12 Truck Engines Lubrication System
3126 Truck Engine Fuel Transfer Pump - Fuel Transfer Pump and High Pressure Oil Pump