Fuel Filter Base
Show/hide table
Illustration 1 | g00322250 |
Typical example |
(1) Put 4C-9507 Retaining Compound on the tapered end of the stud to the following distance. ...
(2) Distance from the sealing surface of the filter base to the end of the stud ...
(3) Sealing surface of the stud
Note: Do not damage this surface.
(4) Torque for stud ...
Caterpillar Information System:
3512 Industrial Engine Customer Specified Parameters
3126 Industrial Engine Fuel Filter Lines
3126E and 3126B Commercial and Truck Engines Engine Protection Plans
3116 Truck Engine Reference Material
3126 Truck Engine (Military) Emissions Warranty Information
3126 Truck Engine (Military) California Emission Control Warranty Statement
3126 HEUI Industrial Engine Fuel System
3512 Industrial Engine Engine Operation with Active Diagnostic Codes
3512 Industrial Engine Permanent Fault Logging
3126 Truck Engine (Military) Federal Emission Control Warranty
3126E and 3126B Commercial and Truck Engines Water Pump - Inspect
3406E and 3456 Industrial Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
3126 Truck Engine Unit Injector
C-10 and C-12 Truck Engines Lubrication System
3126 Truck Engine Fuel Transfer Pump - Fuel Transfer Pump and High Pressure Oil Pump
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Piston and Rings
C-10 and C-12 Truck Engines Cooling System
3126 Truck Engine Valve Rocker Arms and Lifters
3126 Truck Engine Cylinder Head Valves
3126 Truck Engine Valve Mechanism Cover
C-10 and C-12 Truck Engines Basic Block
3126B Engine for Caterpillar Built Machines Cylinder Head
3126 Truck Engine Camshaft
3126 Truck Engine Exhaust Manifold