Fuel Filter Lines
Show/hide table
Illustration 1 | g00437206 |
Typical example Left side of engine |
Note: Refer to the System Operation, Testing and Adjusting, "Fuel Pressure" for the correct method of inspecting fuel pressure.
(1) Tube assembly (fuel filter to fuel gallery)
(2) Tube assembly (fuel transfer pump to fuel filter)
(3) Fuel outlet port
(4) The fuel pressure regulator valve maintains minimum fuel system pressure.
- Minimum pressure at low idle ... 400 kPa (58 psi)
(5) Cylinder head
(6) Fuel gallery
(7) Fuel outlet
Caterpillar Information System:
3126E and 3126B Commercial and Truck Engines Engine Protection Plans
3116 Truck Engine Reference Material
3126 Truck Engine (Military) Emissions Warranty Information
3126 Truck Engine (Military) California Emission Control Warranty Statement
3126 HEUI Industrial Engine Fuel System
3512 Industrial Engine Engine Operation with Active Diagnostic Codes
3512 Industrial Engine Permanent Fault Logging
3126 Truck Engine (Military) Federal Emission Control Warranty
3126E and 3126B Commercial and Truck Engines Water Pump - Inspect
3406E and 3456 Industrial Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
3126E and 3126B Commercial and Truck Engines Severe Service Application - Check
3512 Industrial Engine Diagnostic Flash Code Retrieval
3512 Industrial Engine Customer Specified Parameters
3126B Marine Engine Fuel Filter Base
3126 Truck Engine Unit Injector
C-10 and C-12 Truck Engines Lubrication System
3126 Truck Engine Fuel Transfer Pump - Fuel Transfer Pump and High Pressure Oil Pump
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Piston and Rings
C-10 and C-12 Truck Engines Cooling System
3126 Truck Engine Valve Rocker Arms and Lifters
3126 Truck Engine Cylinder Head Valves
3126 Truck Engine Valve Mechanism Cover
C-10 and C-12 Truck Engines Basic Block
3126B Engine for Caterpillar Built Machines Cylinder Head