Water Temperature Regulator
Show/hide table
Illustration 1 | g00295521 |
Water temperature regulator (typical example) |
Show/hide table
Nominal temperature that is stamped on the base of the bypass valve of the water temperature regulator     | Opening temperature     | Fully open temperature     | Minimum stroke of the water temperature regulator at the fully open temperature     |
---|---|---|---|
82°C (180°F)     |
77 to 85°C (171 to 185°F)     |
92 to 98°C (198 to 208°F)     |
9.0 mm (0.35 inch)     |
71°C (160°F)     |
67 to 75°C (153 to 167°F)     |
85 to 88°C (185 to 190°F)     |
9.0 mm (0.35 inch)     |
Water Temperature Regulator Housing
Show/hide table
Illustration 2 | g00598428 |
(1) Water temperature regulator housing
(2) Water temperature regulator
(3) Pin
(4) Tighten the two bolts for the water temperature regulator housing to the following torque. ... 22 N·m (16 lb ft)
Pressure Cap
Show/hide table
Illustration 3 | g00295522 |
Pressure cap |
Maximum relief pressure ... 48 kPa (7 psi)
Maximum temperature at sea level ... 103°C (217°F)
Caterpillar Information System:
3412 Generator Set Engines Electrical System
3412 Generator Set Engines Cylinder Liner
3034 Engine for Caterpillar Built Machines Fuel Injection Nozzles
3412 Generator Set Engines Coolant Temperature Switch
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure
3034 Engine for Caterpillar Built Machines Engine Oil Pan
3412 Generator Set Engines Inlet Air Temperature Sensor
3034 Engine for Caterpillar Built Machines Fuel Transfer Pump
3034 Engine for Caterpillar Built Machines Engine Design
3412 Generator Set Engines Cylinder Block
3618 Engine Fuel System - Prime
3034 Engine for Caterpillar Built Machines Water Pump
3406C Engines for Caterpillar Built Machines Cylinder Liner Projection
3412 Generator Set Engines Engine Oil Temperature Sensor
3412 Generator Set Engines Crankshaft
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod and Main Bearing Journals
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod
3412 Generator Set Engines Fuel Injection Pump Housing
3412 Generator Set Engines Piston and Rings
3408C, 3412C and 3412D High Performance Marine Engines Troubleshooting
3034 Engine for Caterpillar Built Machines Inlet Manifold
3034 Engine for Caterpillar Built Machines Exhaust Manifold
3618 Engine Engine Operation