Engine Oil Pan
Show/hide table
 | |
| Illustration 1 | g00386914 |
Engine oil pan | |
Apply a thin bead of 8T-9022 Silicone Gasket on the engine oil pan.
(1) Tighten the bolts and the nuts for the engine oil pan to the following torque. ... 22 N·m (16 lb ft)
(2) O-ring
(3) Tighten the drain plug of the engine oil pan to the following torque. ... 34 N·m (25 lb ft)
Oil Suction Tube
Show/hide table
 | |
| Illustration 2 | g00695349 |
(1) O-ring
(2) Oil suction tube
(3) Tighten the bolts for the oil suction tube to the following torque. ... 22 N·m (16 lb ft)
(4) Strainer
Note: Install a new O-ring in the hole of the cylinder block when the oil suction tube is removed or replaced.
Caterpillar Information System:
3412 Generator Set Engines Inlet Air Temperature Sensor
3034 Engine for Caterpillar Built Machines Fuel Transfer Pump
3034 Engine for Caterpillar Built Machines Engine Design
3412 Generator Set Engines Cylinder Block
3618 Engine Fuel System - Prime
G3612 and G3616 Engines Ignition System
3618 Engine Engine Mounts - Check
3412 Generator Set Engines Engine Oil Filter Base
3412 Generator Set Engines Engine Oil Pressure Sensor
3412E and C30 Marine Engines Cooling System
3412 Generator Set Engines Lubrication System
3412C Engine Engine Oil Pump
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings
3412 Generator Set Engines Coolant Temperature Switch
3034 Engine for Caterpillar Built Machines Fuel Injection Nozzles
3412 Generator Set Engines Cylinder Liner
3412 Generator Set Engines Electrical System
3034 Engine for Caterpillar Built Machines Water Temperature Regulator
3034 Engine for Caterpillar Built Machines Water Pump
3406C Engines for Caterpillar Built Machines Cylinder Liner Projection
3412 Generator Set Engines Engine Oil Temperature Sensor
3412 Generator Set Engines Crankshaft
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod and Main Bearing Journals