Exhaust Manifold
Show/hide table
Illustration 1 | g00691528 |
Exhaust manifold |
(1) Gasket
Install the gasket without sealant.
(2) Inner bolts
(3) Outer bolts
Tighten the four inner bolts first. Then tighten the four outer bolts.
Tighten the bolts and nuts to the following torque.
- Earlier bolts and nuts ... 22 N·m (16 lb ft)
- Later bolts ... 18 N·m (13 lb ft)
Note: Earlier engines used two studs and six bolts to fasten the exhaust manifold to the engine. If these bolts are found to be loose, remove the bolts and install eight powerlock bolts. The threaded portion of the bolt is machined in a oval shape.
Note: Use a flat washer 1.83 mm (0.072 inch) with the newer bolts, only if the bosses of the exhaust manifold have been machined.
(4) Two removable guides that align the exhaust manifold during installation
Caterpillar Information System:
3034 Engine for Caterpillar Built Machines Inlet Manifold
3408C, 3412C and 3412D High Performance Marine Engines Troubleshooting
3412 Generator Set Engines Piston and Rings
3412 Generator Set Engines Fuel Injection Pump Housing
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod
3408E and 3412E Engines for Caterpillar Built Machines Connecting Rod and Main Bearing Journals
3412 Generator Set Engines Crankshaft
3412 Generator Set Engines Engine Oil Temperature Sensor
3406C Engines for Caterpillar Built Machines Cylinder Liner Projection
3034 Engine for Caterpillar Built Machines Water Pump
3034 Engine for Caterpillar Built Machines Water Temperature Regulator
3412 Generator Set Engines Electrical System
3618 Engine Engine Operation
3034 Engine for Caterpillar Built Machines Fuel Injection Pump
3618 Engine Tools
3412 Generator Set Engines Speed/Timing Sensor
3412 Generator Set Engines Flywheel Housing
3500B Locomotive Engines Model View Illustrations
3412 Generator Set Engines Fuel Pressure Indicator
3412C Engine Engine Design
3034 Engine for Caterpillar Built Machines Cylinder Head Valves
3034 Engine for Caterpillar Built Machines Valve Mechanism Cover
3034 Engine for Caterpillar Built Machines Cylinder Head
3412 Generator Set Engines Coolant Temperature Sensor