Articulating Hitch (Offset)
Show/hide table
| |
| Illustration 1 | g06128911 |
Show/hide table
| Specification for 390-7908 Oscillating Hitch | |||
| Item | Qty | Part | Specification Description |
| Prior to bearing assembly clean bore to remove all oil, grease, scale, dirt, and other surface contamination. | |||
| 1 | 2 | 358-6705 Pin As | Diameter is |
| 2 | 1 | 364-3603 Pin As | Diameter is |
| 3 | 1 | 364-3602 Pin | Diameter is |
| 4 | 8 | 112-3928 Bolt | After tighten, maintain a minimum gap of Torque to |
Show/hide table
| |
| Illustration 2 | g06128919 |
Show/hide table
| 5 | - | - | Before assembly, lightly lubricate this surface with lubricant that is being sealed. |
| 6 | 1 | 2P-1279 Locknut | Before assembly, apply blue Loctite 242 to the threads.
Torque to |
| 7 | 1 | 8S-6959 Lip Type Seal | Install seals with the lips facing outward. Spring should be visible. |
| 8 | As required, use the following shims to maintain |
||
| 1 | 365-0067 Shim | Thickness of one shim is |
|
| 1 | 365-0066 Shim | Thickness of one shim is |
|
| 9 | Install shims as required, to eliminate gaps between plate and surface: | ||
| 2 | 363-9168 Shim | Thickness of one shim is |
|
| 2 | 363-9167 Shim | Thickness of one shim is |
|
| 2 | 361-1901 Shim | Thickness of one shim is |
|
| 10 | 2 | 3K-6454 Lip Type Seal | Install seals with the lips facing outward. Spring should be visible.
Lightly lubricate with the lubricant that is being sealed. |
Caterpillar Information System:
New Piston and Gear Pump Group Is Now Available for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5073} New Piston and Gear Pump Group Is Now Available for Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {5073}
C7.1 Engines and Generator Sets Intake Manifold Air Temperature Is High
C7.1 Engines and Generator Sets Intake Manifold Air Pressure Is Low
C7.1 Engines and Generator Sets Intake Manifold Air Pressure Is High
980L Tier 3 Wheel Loader Engine Supplement Expansion Tank - Remove and Install
C7.1 Engines and Generator Sets Inlet Air Is Restricted
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Disassemble
C7.1 Engines and Generator Sets Fuel Temperature Is High
C7.1 Engines and Generator Sets Fuel Rail Pressure Problem
2570D and 2670D Wheel Feller Buncher Engine Supplement Piston Motor (Fan) - Remove and Install
C7.1 Engines and Generator Sets Fuel Contains Water
MH3037 Material Handler Machine Systems Main Control Valve - Remove and Install - Lower Valve
994K Wheel Loader Power Train Pump Drive (Front) - Remove and Install
A New Pad Assembly for the Stabilizer Group Is Now Available on Certain Knuckleboom Loaders {7222} A New Pad Assembly for the Stabilizer Group Is Now Available on Certain Knuckleboom Loaders {7222}
The Orientation of the Rear Suspension Group is Improved on Certain 777 Off-Highway Trucks {0679, 0756, 7200, 7201, 7213} The Orientation of the Rear Suspension Group is Improved on Certain 777 Off-Highway Trucks {0679, 0756, 7200, 7201, 7213}
High Pitch Noise from the Flushing Valve May Occur on Certain Skid Steer Loaders {4351, 5058} High Pitch Noise from the Flushing Valve May Occur on Certain Skid Steer Loaders {4351, 5058}
Installation Procedure of the Gusset Plate in the Frame Assembly on Certain HF201B Felling Heads {6319} Installation Procedure of the Gusset Plate in the Frame Assembly on Certain HF201B Felling Heads {6319}
New Gusset Plate in the Frame Assembly Is Now Used on Certain HF201B Felling Heads {6319} New Gusset Plate in the Frame Assembly Is Now Used on Certain HF201B Felling Heads {6319}
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Tilt Lever and Tilt Link - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders C7.1 Engine Supplement Piston Motor (Fan) - Disassemble
Special Instruction, "Procedure to Update the Suspension Link Mounts on Certain 795F AC Off-Highway Trucks" is Now Available {0679, 3260, 7051, 7200, 7230} Special Instruction, "Procedure to Update the Suspension Link Mounts on Certain 795F AC Off-Highway Trucks" is Now Available {0679, 3260, 7051, 7200, 7230}
MD6200 Rotary Drill Automatic Lubrication Grease Tank - Fill
Improved Rear Suspension Link Mounts are Now Used on Certain 793F Off-Highway Trucks {0679, 3260, 7200, 7230} Improved Rear Suspension Link Mounts are Now Used on Certain 793F Off-Highway Trucks {0679, 3260, 7200, 7230}
525D, 535D, 545D and 555D Wheel Skidders C7.1 Engine Supplement Piston Motor (Fan) - Assemble