PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 0R-9250, 0R-3860, AND 0R-3233 REMAN SCAVENGE OIL PUMPS IN DEALER PARTS STOCK
Usage:
TEBE0043-00
Show/hide table
| 22Jul2013 |
U-322
A-223
D-274
O-272
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 0R-9250, 0R-3860, AND 0R-3233 REMAN SCAVENGE OIL PUMPS IN DEALER PARTS STOCK |
|
| 1312 7750 | PI70491 |
|
Show/hide table
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Oct2013 |
PROBLEM
Show/hide table
| The reman scavenge oil pump gear cover bolts may have insufficient thread engagement on two of the four bolts. |
ACTION REQUIRED
Show/hide table
| The affected parts are 0R-9250, 0R-3860, and 0R-3233 Reman Scavenge Oil Pumps in dealer parts stock that are China source only (Shanghai-PXC027). The affected date range is D01M01Y13PXC027 to D20M04Y13PXC027. Refer to Image 1 for an example label. If a 0R-9250, 0R-3860, or 0R-3233 Reman Scavenge Oil Pump is in the affected date range, inspect the bolts in the pump. Remove two bolts located on opposite corners of the gear cover housing, where the dowels are located as indicated by the bulge in casting. Refer to Image 2, and Image 3. If the bolt length is 1.5 inches, replace the bolt with a 0S-1587 Bolt that is 1.75 inches long. Tighten to 105 +/- 20 Nm. Mark the package to indicate that the pump assembly has been inspected according to this program and return the pump assembly to dealer parts stock. |
Show/hide table
 |
| Image1 |
 |
| Image2 |
 |
| Image3 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all pumps inspected, and/or reworked in dealer parts stock. 0.25 hour will be allowed for each pump that is inspected, and/or reworked that is in the affected date range in dealer parts stock. Two 0S-1587 Bolts are allowed for each pump that is reworked in dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR UPGRADING THE DIGIT AND GDET FIRMWARE ON CERTAIN UPSB505 DOUBLE CONVERSION UNINTERRUPTIBLE POWER SUPPLIES PRODUCT SUPPORT PROGRAM FOR UPGRADING THE DIGIT AND GDET FIRMWARE ON CERTAIN UPSB505 DOUBLE CONVERSION UNINTERRUPTIBLE POWER SUPPLIES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUMES DISPOSAL AND FUEL HOSES ON CERTAIN PMC27 RENTAL GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUMES DISPOSAL AND FUEL HOSES ON CERTAIN PMC27 RENTAL GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 9X-8889 BOLT ON THE 333-3648 IDLER GP WITHIN THE 274-3822 PUMP DRIVE ON CERTAIN TH48-E70 TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 9X-8889 BOLT ON THE 333-3648 IDLER GP WITHIN THE 274-3822 PUMP DRIVE ON CERTAIN TH48-E70 TRANSMISSIONS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 326-2623 PRELUBRICATION PUMP COVER SCREWS ON CERTAIN G3508B, G3512B, G3516B, G3520B, G3606, G3608, G3612, AND G3616 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE 326-2623 PRELUBRICATION PUMP COVER SCREWS ON CERTAIN G3508B, G3512B, G3516B, G3520B, G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TURBO EXHAUST MANIFOLD AND TURBO BELLOWS ON CERTAIN 3512C AND 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE TURBO EXHAUST MANIFOLD AND TURBO BELLOWS ON CERTAIN 3512C AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE AIR SHUT OFF BRACKETS ON CERTAIN C27 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REMOVING THE AIR SHUT OFF BRACKETS ON CERTAIN C27 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUMES DISPOSAL AND FUEL HOSES ON CERTAIN C27 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUMES DISPOSAL AND FUEL HOSES ON CERTAIN C27 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 206-6224 EXCITER ON CERTAIN D3500 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 206-6224 EXCITER ON CERTAIN D3500 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBINE OUTLET V-BAND CLAMPS ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBINE OUTLET V-BAND CLAMPS ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN 3516C AND 3516C HD GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN 3516C AND 3516C HD GENERATOR SETS
Servicio de Conectores Deutsch de Tipo HD DT y DRC Servicio de Conectores Deutsch de Tipo HD DT y DRC
OBSERVING FUEL FLOW TO CHECK FOR EXCESSIVE AIR IN FUEL SYSTEMS{0651, 1250} OBSERVING FUEL FLOW TO CHECK FOR EXCESSIVE AIR IN FUEL SYSTEMS{0651, 1250}
PRODUCT SUPPORT PROGRAM FOR REMOVING DIODES IN THE LEFT HAND STARTER DRIVE HARNESS RETURN CIRCUIT ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REMOVING DIODES IN THE LEFT HAND STARTER DRIVE HARNESS RETURN CIRCUIT ON CERTAIN 3512C HD, AND 3516C HD MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER COUPLINGS ON CERTAIN 3512C AND 3516C MARINE ENGINES EQUIPPED WITH A PLATE TYPE HEAT EXCHANGERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE JACKET WATER COUPLINGS ON CERTAIN 3512C AND 3516C MARINE ENGINES EQUIPPED WITH A PLATE TYPE HEAT EXCHANGERS
PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR PINNING THE TURBOCHARGER HOUSING ON CERTAIN 3516C MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 327-5258 TORQUE CONVERTER HOUSING ON CERTAIN CX28 TRANSMISSIONS IN U.S. MILITARY TACTICAL VEHICLES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 327-5258 TORQUE CONVERTER HOUSING ON CERTAIN CX28 TRANSMISSIONS IN U.S. MILITARY TACTICAL VEHICLES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEA WATER OUTLET ELBOW ON CERTAIN 3512C HD AND 3516C HD MARINE ENGINES EQUIPPED WITH SEA WATER COOLED PLATE-TYPE HEAT EXCHANGER PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEA WATER OUTLET ELBOW ON CERTAIN 3512C HD AND 3516C HD MARINE ENGINES EQUIPPED WITH SEA WATER COOLED PLATE-TYPE HEAT EXCHANGER
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS AND OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS OPERATING IN PRIME OR CONTINUOUS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS AND OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS OPERATING IN PRIME OR CONTINUOUS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR COMPRESSOR SUPPORT BRACKET ON CERTAIN C-18 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AIR COMPRESSOR SUPPORT BRACKET ON CERTAIN C-18 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 5P-9297 CLIP ON CERTAIN G3516, G3516B, AND G3520B ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 5P-9297 CLIP ON CERTAIN G3516, G3516B, AND G3520B ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWITCH AND CONTACTOR FOR THE JACKET WATER HEATER CONTROL ON CERTAIN 3512C LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWITCH AND CONTACTOR FOR THE JACKET WATER HEATER CONTROL ON CERTAIN 3512C LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING CLUTCH NO 6 ON CERTAIN CX48-P2300 PETROLEUM TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING CLUTCH NO 6 ON CERTAIN CX48-P2300 PETROLEUM TRANSMISSIONS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C27, AND C32 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C27, AND C32 GENERATOR SETS