Travel Motor - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Description | Qty |
| A | 123-4370 | M20 x 2.5 x 150mm Guide Stud | 2 |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Refer to Operation and Maintenance Manual, "'Hydraulic System Oil – Change'" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03231677 - Remove bolts (1) and remove cover (2). Use two people in order to remove the cover.
Show/hide table
Illustration 2 g01019385 - Disconnect hose assemblies (3), (4), (5), and (6).
Show/hide table
Illustration 3 g01019399 - Remove mounting bolts (7).
Show/hide table
Illustration 4 g01019408 - Install Tooling (A) and attach a suitable lifting device, as shown. Remove travel motor (8). The weight of travel motor (8) is approximately
60 kg (135 lb) .
- Install travel motor (8) in the reverse order of removal.
- Torque mounting bolts (7) to a torque of
510 ± 20 N·m (376 ± 15 lb ft)
- Torque mounting bolts (7) to a torque of
Caterpillar Information System:
Bronze 416-2492 Engine Overhaul Kit for 3176 Machine Engines{1000} Bronze 416-2492 Engine Overhaul Kit for 3176 Machine Engines{1000}
PL87 Pipelayer TA2 Technical Inspection{7000, 753T} PL87 Pipelayer TA2 Technical Inspection{7000, 753T}
MH3049 Material Handler Hydraulic System Flow Diverter Valve (Optimal Turning) - Adjust
424B and 424B HD Backhoe Loaders Power Train Transmission (Direct Drive) - Disassemble
2013/10/17 New Tube Assemblies are Available for the 797, and 797B Off-Highway Trucks {5056}
424B and 424B HD Backhoe Loaders Power Train Transmission (Direct Drive) - Install
PL83 Pipelayer TA2 Technical Inspection{7000, 753T} PL83 Pipelayer TA2 Technical Inspection{7000, 753T}
2012/09/19 Improved Mounting Updates the Hoist Lines Group on 795F AC Off-Highway Truck {5057, 5057}
C175-16 and C175-20 Locomotive Engines Electronic Unit Injector Sleeve - Remove
Health Interface Module Setup and Configuration Guide Utilities Menu
Health Interface Module Setup and Configuration Guide Communicator Menu
Health Interface Module Setup and Configuration Guide GPS Menu
MH3049 Material Handler Hydraulic System Relief Valve (Hydraulic Oil Warming) - Test and Adjust
559C and 579C Knuckleboom Loaders Piston Pump (Implement)
Software Defect On the Cat® Detect Object Detection System Used On Certain Cat Machines{7620} Software Defect On the Cat® Detect Object Detection System Used On Certain Cat Machines{7620}
2012/09/28 A New Special Instruction to Install the Front Wheel Site Glass Retrofit Kit on Certain Off-Highway Trucks is Now Available {4006, 4205, 7479}
2012/09/19 New Adapter Bearing Is Now Used for Blower Fan Group on 795F AC Off-Highway Trucks {1636, 4017, 7551}
424B and 424B HD Backhoe Loaders Power Train Transmission (Direct Drive) - Assemble
C1.5 and C2.2 Engines for Caterpillar Built Machines Sensors and Electrical Connectors
Alternator - Bosch K1/N1 Alternator - Assemble
424B and 424B HD Backhoe Loaders Power Train Drive Shaft (Rear) - Remove and Install
424B and 424B HD Backhoe Loaders Power Train Parking Brake - Remove and Install
2012/09/13 A New Oil Filter Base Is Used on Certain Commercial Engines {1306, 1308}
2384C and 2484C Knuckleboom Loaders System Schematic