Electronic Unit Injector Sleeve - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 333-0759 | Inj. Sleeve Shaft As. - 1/2 Drive | 1 |
Start By:
- Remove the electronic unit injector. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
- Drain the coolant from the cooling system into a suitable container for storage or for disposal. Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
Illustration 1 g06394132 Note: Electronic unit injector sleeve (1) is a threaded joint.
Show/hide table
Illustration 2 g01850908 - Install Tooling (A) in electronic unit injector sleeve (1).
- Remove electronic unit injector sleeve (1).
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Caterpillar Information System:
Health Interface Module Setup and Configuration Guide Utilities Menu
Health Interface Module Setup and Configuration Guide Communicator Menu
Health Interface Module Setup and Configuration Guide GPS Menu
Health Interface Module Setup and Configuration Guide Device Menu
559C and 579C Knuckleboom Loaders Location of Components (HVAC System)
Health Interface Module Setup and Configuration Guide User Interface
C1.5 and C2.2 Engines for Caterpillar Built Machines Electronic Service Tools
Alternator - Bosch K1/N1 Alternator - Disassemble
2012/11/01 New Bellows Are Used for the Turbocharger Exhaust on C175-20 Off-Highway Truck Engines {1061}
Alternator - Bosch K1/N1 General Information
C1.5 and C2.2 Engines for Caterpillar Built Machines Glossary
424B and 424B HD Backhoe Loaders Power Train Transmission (Direct Drive) - Remove
2012/09/19 Improved Mounting Updates the Hoist Lines Group on 795F AC Off-Highway Truck {5057, 5057}
PL83 Pipelayer TA2 Technical Inspection{7000, 753T} PL83 Pipelayer TA2 Technical Inspection{7000, 753T}
424B and 424B HD Backhoe Loaders Power Train Transmission (Direct Drive) - Install
2013/10/17 New Tube Assemblies are Available for the 797, and 797B Off-Highway Trucks {5056}
424B and 424B HD Backhoe Loaders Power Train Transmission (Direct Drive) - Disassemble
MH3049 Material Handler Hydraulic System Flow Diverter Valve (Optimal Turning) - Adjust
PL87 Pipelayer TA2 Technical Inspection{7000, 753T} PL87 Pipelayer TA2 Technical Inspection{7000, 753T}
Bronze 416-2492 Engine Overhaul Kit for 3176 Machine Engines{1000} Bronze 416-2492 Engine Overhaul Kit for 3176 Machine Engines{1000}
521B and 522B Track Feller Bunchers Machine Systems Travel Motor - Remove and Install
MH3049 Material Handler Hydraulic System Relief Valve (Hydraulic Oil Warming) - Test and Adjust
559C and 579C Knuckleboom Loaders Piston Pump (Implement)
Software Defect On the Cat® Detect Object Detection System Used On Certain Cat Machines{7620} Software Defect On the Cat® Detect Object Detection System Used On Certain Cat Machines{7620}