Declaration of Conformity
Show/hide table
An EC Declaration of Conformity document was provided with the machine if it was manufactured to comply with specific requirements for the European Union. In order to determine the details of the applicable Directives, review the complete EC Declaration of Conformity provided with the machine. The extract shown below from an EC Declaration of Conformity for machines that are declared compliant to "2006/42/EC" applies only to those machines originally "CE" marked by the manufacturer listed and which have not since been modified.     | ||||||
    | ||||||
EC DECLARATION OF CONFORMITY OF MACHINERY     |
||||||
    | ||||||
Manufacturer: CATERPILLAR PAVING PRODUCTS INC. 9401 85th Ave. North Brooklyn Park, MN 55445 USA     |
||||||
Person authorized to compile the Technical File and to communicate relevant part (s) of the Technical File to the Authorities of European Union Member States on request:     |
||||||
    | Standards & Regulations Manager,Caterpillar France S.A.S 40, Avenue Leon-Blum, B.P. 55, 38041 Grenoble Cedex 9, France     |
|||||
I, the undersigned, _________, hereby certify that the construction equipment specified hereunder     | ||||||
Description:     |
Generic Denomination:     | Paving Equipment     |     | |||
    |
Function:     | Asphalt Paver     |     |     | ||
    |
Model/Type:     | AP1000E     |     |     | ||
    |
Serial Number:     |     |     |     | ||
    |
Commercial Name:     | Caterpillar     |
    |     | ||
Fulfils all the relevant provisions of the following Directives     |     | |||||
    |
    |     |     |     |     |     |
    | Directives     | Notified Body     | Document No.     |
    | ||
    | 2006/42/EC     | N/A     |     |     | ||
    | 2000/14/EC amended by 2005/88/EC, Note (1)     |     |     |     | ||
    | 2004/108/EC     | N/A     |     |     | ||
    |     |     |     |     |     |     |
Note (1)     |
Annex -_____ Guaranteed Sound Power Level -_____dB (A) Representative Equipment Type Sound Power Level - _____dB (A) Engine Power per ____-____ kW Rated engine speed - _____ rpm Technical Documentation accessible through person listed above authorized to compile the Technical File     |
    | ||||
    |
    |     |     |     |     | |
    |     |     | ||||
Done at:     |
    |     | Signature     |     |     | |
Date:     |
    |     | Name/Position     |     |     | |
    |     |     |     |     |     |     |
Note: The above information was correct as of April, 2010, but may be subject to change, please refer to the individual declaration of conformity issued with the machine for exact details.     |
Caterpillar Information System:
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Drive Shaft (Front) - Remove and Install
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Service Brake Oil)
2011/06/08 Improved Magnetic Switch Is Now Used For Electric Motors On Certain Articulated Trucks {4324, 5927, 7499}
XQ125 Generator Set Fuel Tank Water and Sediment - Drain
SC-57 Felling Head Felling Head Preparation for Troubleshooting
Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901} Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901}
2570C and 2670C Wheel Feller Bunchers Engine Supplement Turbocharger - Install - First Stage Turbocharger
2570C and 2670C Wheel Feller Bunchers Engine Supplement Turbocharger - Install - Second Stage Turbocharger
3516B Engine for 994F and 994H Wheel Loaders Oil Pressure Is Low
2570C and 2670C Wheel Feller Bunchers Engine Supplement Turbocharger - Remove - First Stage Turbocharger
2570C and 2670C Wheel Feller Bunchers Engine Supplement Turbocharger - Remove - Second Stage Turbocharger
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Drive Shaft (Center) - Remove and Install
262C2 Skid Steer Loader, 277C2 and 287C2 Multi Terrain Loaders and 279C2 and 289C2 Compact Track Loaders Rated Load
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Drive Shaft (Rear) - Remove and Install
2011/08/26 A New Wiring Harness Is Used On Certain Commercial Engines {1408, 1900}
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Brake Accumulator (Service) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
SC-57 Felling Head Felling Head Disc Saw Performance - Test and Adjust
R1600G Load Haul Dump 3176C Engine Supplement Transmission Oil Cooler - Remove
Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186} Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186}
C13, C15, and C18 Generator Set Engines Turbocharger