Drive Shaft Slip Joint - Lubricate
Catatan: Prosedur ini hanya untuk sambungan slip yang memiliki fiting gemuk. Beberapa sambungan slip dilumasi untuk usia pakai. Sambungan slip yang dilumasi untuk usia pakai tidak dilengkapi dengan fiting gemuk.
Show/hide table
| |
| Ilustrasi 1 | g01618305 |
Show/hide table
| |
| Ilustrasi 2 | g00286770 |
Lumasi satu fiting pada spline poros penggerak.
Catatan: Gunakan pelumas dalam jumlah yang tepat.
Caterpillar Information System:
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems MID 039 - CID 1403 - FMI 06
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems MID 039 - CID 1403 - FMI 05
A New Retaining Method Is Available For The Boom Pivot Pin On Certain Telehandlers{5456} A New Retaining Method Is Available For The Boom Pivot Pin On Certain Telehandlers{5456}
773E Off-Highway Truck Specifications
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems MID 039 - CID 1403 - FMI 03
CD54 Vibratory Compactor Machine Systems Water Tank - Remove and Install
CD54 Vibratory Compactor Machine Systems Water Filter - Remove and Install
PL61 Pipelayer Machine Systems Hook Winch Motor - Remove
PL61 Pipelayer Machine Systems Boom Sheave Block (Lower) - Install
2008/07/28 A New Track Shoe is Now Used on Certain Cold Planers {4172}
2008/11/03 An Improved Cold Start Arrangement Is Available for some Track Feller Bunchers {1401, 1402, 1408, 1450, 1453, 7000, 7257}
785D OEM Off-Highway Truck Machine Systems Pump Drive - Assemble
793F CMD Off-Highway Truck Hydraulic Fan and Steering System Oil Filter (Rear Axle Lubrication)
PL61 Pipelayer Machine Systems Hook Winch Motor - Install
PL61 Pipelayer Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems MID 039 - CID 1405 - FMI 03
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hydraulic Accumulator (Suspension) - Test and Charge
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems MID 039 - CID 1405 - FMI 05
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems MID 039 - CID 1405 - FMI 06
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems MID 039 - CID 1529 - FMI 02
Procedure for Checking the Electrical Circuit that is for the Actuator and the Water Valve{1812, 7304, 7320} Procedure for Checking the Electrical Circuit that is for the Actuator and the Water Valve{1812, 7304, 7320}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Electronics and Electrical Systems MID 039 - CID 1529 - FMI 04
Field Installation of the Pin Retention System for the Hoist Cylinder on the 797 Off-Highway Truck{5102, 6068, 7562} Field Installation of the Pin Retention System for the Hoist Cylinder on the 797 Off-Highway Truck{5102, 6068, 7562}
2008/08/11 The Crankcase Breather for the Engine is Relocated {1107, 1157}