Blade Lift Arm - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-1834 | Bearing Puller Adapter | 1 |
| 6V-3170 | Double Acting Cylinder | 1 | |
| 4K-0684 | Hard Washer | 1 | |
| 4C-9634 | Puller Stud | 1 | |
| 9U-6832 | Nut | 1 | |
| 3S-6224 | Electric Hydraulic Pump Gp | 1 | |
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Remove bolts (2). Repeat for the opposite side of the machine.
- Remove cover (1) from the machine.
Show/hide table
Illustration 2 g01397240 - Remove plate (3).
- Attach a suitable lifting device to blade lift cylinder (4). The weight of blade lift cylinder (4) is approximately
91 kg (200 lb) . - Remove bolts (5) and caps (7).
- Use the suitable lifting device in order to position blade lift cylinder (4) on front frame assembly (6). Secure blade lift cylinder (4) to the front frame assembly (6).
Show/hide table
Illustration 3 g01397260 - Attach a suitable lifting device to centershift cylinder (8).
- Remove bolts (9) and cap (10).
- Use the machine to retract centershift cylinder (8). Use the suitable lifting device in order to lower centershift cylinder (8) to the drawbar (11).
Show/hide table
Illustration 4 g01397275 - Attach a suitable lifting device to blade lift arm (12). The weight of blade lift arm (12) is approximately
113 kg (250 lb) . - Remove bolts (13) and lock (15).
- Remove pin (14).
Show/hide table
Illustration 5 g01397310 - Remove bolts (17) and lock (18).
- Remove bolt (20) and the plate.
- Remove pin (19).
- Remove four thrust washers (16) (not shown).
- Use the suitable lifting device in order to remove blade lift arm (12).
Show/hide table
Illustration 6 g01397448 - Remove bolts (21) and retainer (22).
- Remove seal (23) and shims (24).
- Partially remove yoke (27) from blade lift arm (12).
- Use two people in order to remove yoke (27) from blade lift arm (12). The weight of yoke (27) is approximately
23 kg (50 lb) . - Remove washers (25) and seals (26).
- Remove bearings (28).
Show/hide table
Illustration 7 g01397451 - Remove lip seals (29).
Note: Note the orientation of lip seals (29) for assembly purposes.
Show/hide table
Illustration 8 g01397453 Show/hide table
Illustration 9 g01397459 - Install Tooling (A) and support Tooling (A) with a suitable lifting device. Remove bearings (30).
Show/hide table
| |
| Illustration 1 | g01415674 |
Caterpillar Information System:
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Relief Valve (Steering) - Test
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Gear Pump Flow (Cooling Fan) - Test
C32 Engine for D11T Track-Type Tractors CAN Data Link - Test
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Gear Pump Flow (Steering) - Test
AccuGrade® Dealer ARO Installation For M-Series, M-Series 2, and M-Series 3 Motor Graders {7220} AccuGrade® Dealer ARO Installation For M-Series, M-Series 2, and M-Series 3 Motor Graders {7220}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust
CS54 and CP54 Vibratory Soil Compactors Operation Information
14L Motor Grader Machine Systems Window Wiper and Wiper Motor (Door) - Remove and Install - Door
24M Motor Grader Power Train Electronic Control System MID 027 - CID 1473 - FMI 14
The Lubrication Sleeve in the Planetary Case and Parts Group is Inadequately Retained on some Off-Highway Trucks{3030, 3064, 3160, 7540} The Lubrication Sleeve in the Planetary Case and Parts Group is Inadequately Retained on some Off-Highway Trucks{3030, 3064, 3160, 7540}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Piston Motor (Vibratory) - Test - Cooling Valve
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test
CP54 and CS54 Vibratory Soil Compactors Machine Systems Relief Valve (Charge) - Test and Adjust
2009/03/02 A New Hose Is Now Used {1052, 1307}
C32 Engine for D11T Track-Type Tractors Cat Data Link - Test
2007/09/17 New Cab Temperature Control Potentiometer Is Now Available {5721}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Fan Motor Speed (Radiator Cooling) - Test and Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Relief Valve (Blade) - Test and Adjust
14L Motor Grader Machine Systems Secondary Steering Pump and Motor - Remove
120M and 12M Motor Grader Machine Systems Blade Lift Arm - Install
C32 Engine for D11T Track-Type Tractors Coolant Flow - Test
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System General Information (Propel System)
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Operator Controls (Propel System)
2007/09/17 Ensure that the 9X-9591 Electrical Converter Gp is Wired Correctly {1421, 1901, 7490}