Window Wiper and Wiper Motor (Door) - Remove and Install - Door
- Remove nuts (1). Disconnect hose (3). Remove window wiper (2).
Note: Mark the position of window wiper (2) for installation purposes.
Show/hide table
Illustration 2 g01415372 - Remove caps (4).
- Remove nuts (5).
Show/hide table
Illustration 3 g01415374 - Remove screws (6).
Show/hide table
Illustration 4 g01415375 - Open door (7). Remove screws (8). Remove cover (9).
Show/hide table
Illustration 5 g01415400 - Disconnect harness assembly (10). Remove bolts (11). Disconnect linkage (13). Remove wiper motor (12).
Show/hide table
| |
| Illustration 1 | g01415369 |
- Connect linkage (13) onto wiper motor (12). Install bolts (11). Connect harness assembly (10).
Show/hide table
Illustration 7 g01415375 - Install cover (9). Install screws (8). Close door (7).
Show/hide table
Illustration 8 g01415374 - Install screws (6).
Show/hide table
Illustration 9 g01415372 - Install nut (5). Tighten nut (5) to a torque of
38 ± 2 N·m (28 ± 2 lb ft) . - Install caps (4).
Show/hide table
Illustration 10 g01415369 - Install window wiper (2).
Note: Window wiper (2) must be installed on the alignment mark for proper operation.
- Connect hose (3). Install nut (1). Tighten nut (1) to a torque of
23 ± 1 N·m (204 ± 9 lb in) .Note: Nut (1) must maintain a torque of
12 N·m (106 lb in) minimum.
Show/hide table
| |
| Illustration 6 | g01415400 |
Caterpillar Information System:
24M Motor Grader Power Train Electronic Control System MID 027 - CID 1473 - FMI 14
The Lubrication Sleeve in the Planetary Case and Parts Group is Inadequately Retained on some Off-Highway Trucks{3030, 3064, 3160, 7540} The Lubrication Sleeve in the Planetary Case and Parts Group is Inadequately Retained on some Off-Highway Trucks{3030, 3064, 3160, 7540}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Piston Motor (Vibratory) - Test - Cooling Valve
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test
VIMS Communicator Troubleshooting
140M Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Install
140M Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Remove
CP54 and CS54 Vibratory Soil Compactors Machine Systems Hydraulic Oil Contamination - Test
2007/11/05 An Improved Oil Tube is Used {1307}
CS54 and CP54 Vibratory Soil Compactors Parking
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Vibratory Frequency - Test and Adjust - Fixed
CS54 and CP54 Vibratory Soil Compactors Operation Information
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust
AccuGrade® Dealer ARO Installation For M-Series, M-Series 2, and M-Series 3 Motor Graders {7220} AccuGrade® Dealer ARO Installation For M-Series, M-Series 2, and M-Series 3 Motor Graders {7220}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Gear Pump Flow (Steering) - Test
C32 Engine for D11T Track-Type Tractors CAN Data Link - Test
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Gear Pump Flow (Cooling Fan) - Test
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Relief Valve (Steering) - Test
120M and 12M Motor Grader Machine Systems Blade Lift Arm - Remove
CP54 and CS54 Vibratory Soil Compactors Machine Systems Relief Valve (Charge) - Test and Adjust
2009/03/02 A New Hose Is Now Used {1052, 1307}
C32 Engine for D11T Track-Type Tractors Cat Data Link - Test
2007/09/17 New Cab Temperature Control Potentiometer Is Now Available {5721}