Engine Lifting Brackets
Usage:
Remove & Install Engine Lifting Brackets
*Remove turbocharger for removal of the rear engine lifting bracket only.
Start By:
a. remove turbocharger*
*Remove turbocharger for removal of the rear engine lifting bracket only.
The air inlet manifold has been removed for photographic purposes only.
1. Remove one cap screw (1).
2. Remove one bolt and washer (3).
3. Remove rear engine lifting bracket (2).
4. Remove two bolts and washers (4).
5. Remove front engine lifting bracket (5).
NOTE: For installation of the engine lifting brackets, reverse the removal steps.
End By:
a. install turbocharger
Caterpillar Information System:
3208 INDUSTRIAL ENGINE Oil Level Gauge
3208 INDUSTRIAL ENGINE Aftercooler
3208 INDUSTRIAL ENGINE Air Inlet Manifold
3208 INDUSTRIAL ENGINE Introduction
3208 INDUSTRIAL ENGINE Testing & adjusting
3208 INDUSTRIAL ENGINE Systems Operation
3208 INDUSTRIAL ENGINE Electric Starter Motor
3208 INDUSTRIAL ENGINE Alternators and Regulators
3208 INDUSTRIAL ENGINE Flywheel
3208 INDUSTRIAL ENGINE Pulley And Damper Group
3208 INDUSTRIAL ENGINE Flywheel Housing Bore
3208 INDUSTRIAL ENGINE Flywheel Housing Runout
3208 INDUSTRIAL ENGINE Air Cleaner Assembly
3208 INDUSTRIAL ENGINE Valve Covers
3208 INDUSTRIAL ENGINE Crankcase Ventilator Valves
3208 INDUSTRIAL ENGINE Water Separator
3208 INDUSTRIAL ENGINE Oil Pan
3208 INDUSTRIAL ENGINE Fuel Filter & Fuel Filter Base
3208 INDUSTRIAL ENGINE Water Temperature Regulators
3208 INDUSTRIAL ENGINE Fan Drive
3208 INDUSTRIAL ENGINE Exhaust Manifolds
3208 INDUSTRIAL ENGINE Air Compressor
3208 INDUSTRIAL ENGINE Fuel Injection Lines
3208 INDUSTRIAL ENGINE Fuel Injection Nozzles