Air Cleaner Assembly
Usage:
Remove & Install Air Cleaner Assembly
1. Fasten lifting slings and a hoist to air cleaner assembly (1). Remove bolts (2), and remove air cleaner assembly (1). The weight of the air cleaner assembly is approximately 23 kg (50 lb).
2. Put air cleaner assembly (1) in position on the air inlet manifold, and install bolts (2) that hold it.
Caterpillar Information System:
3208 INDUSTRIAL ENGINE Engine Lifting Brackets
3208 INDUSTRIAL ENGINE Oil Level Gauge
3208 INDUSTRIAL ENGINE Aftercooler
3208 INDUSTRIAL ENGINE Air Inlet Manifold
3208 INDUSTRIAL ENGINE Introduction
3208 INDUSTRIAL ENGINE Testing & adjusting
3208 INDUSTRIAL ENGINE Systems Operation
3208 INDUSTRIAL ENGINE Electric Starter Motor
3208 INDUSTRIAL ENGINE Alternators and Regulators
3208 INDUSTRIAL ENGINE Flywheel
3208 INDUSTRIAL ENGINE Pulley And Damper Group
3208 INDUSTRIAL ENGINE Flywheel Housing Bore
3208 INDUSTRIAL ENGINE Valve Covers
3208 INDUSTRIAL ENGINE Crankcase Ventilator Valves
3208 INDUSTRIAL ENGINE Water Separator
3208 INDUSTRIAL ENGINE Oil Pan
3208 INDUSTRIAL ENGINE Fuel Filter & Fuel Filter Base
3208 INDUSTRIAL ENGINE Water Temperature Regulators
3208 INDUSTRIAL ENGINE Fan Drive
3208 INDUSTRIAL ENGINE Exhaust Manifolds
3208 INDUSTRIAL ENGINE Air Compressor
3208 INDUSTRIAL ENGINE Fuel Injection Lines
3208 INDUSTRIAL ENGINE Fuel Injection Nozzles
3208 INDUSTRIAL ENGINE Rocker Shaft Assemblies & Push Rods