Air Inlet Manifold
Usage:
Remove Air Inlet Manifold
Start By:
a. remove air cleaner assembly
1. Put identification marks on all hoses, tubes and lines before any disconnections are made.
2. Loosen two hose clamps (4).
3. Disconnect hoses (5) from air inlet manifold (3).
4. Loosen two hose clamps (2) on hose (1).
5. Remove bolts and washers (6).
6. Remove air inlet manifold (3).
Install Air Inlet Manifold
1. Put air inlet manifold (3) in position as shown. Install bolts and washers (6).
2. Put hoses (1) and (5) in position and tighten hose clamps (2) and (4).
End By:
a. install air cleaner assembly
Caterpillar Information System:
3208 INDUSTRIAL ENGINE Introduction
3208 INDUSTRIAL ENGINE Testing & adjusting
3208 INDUSTRIAL ENGINE Systems Operation
3208 INDUSTRIAL ENGINE Electric Starter Motor
3208 INDUSTRIAL ENGINE Alternators and Regulators
3208 INDUSTRIAL ENGINE Flywheel
3208 INDUSTRIAL ENGINE Pulley And Damper Group
3208 INDUSTRIAL ENGINE Flywheel Housing Bore
3208 INDUSTRIAL ENGINE Flywheel Housing Runout
3208 INDUSTRIAL ENGINE Flywheel Runout
3208 INDUSTRIAL ENGINE Flywheel Housing
3208 INDUSTRIAL ENGINE Bearings For Connecting Rods And Mains
3208 INDUSTRIAL ENGINE Aftercooler
3208 INDUSTRIAL ENGINE Oil Level Gauge
3208 INDUSTRIAL ENGINE Engine Lifting Brackets
3208 INDUSTRIAL ENGINE Air Cleaner Assembly
3208 INDUSTRIAL ENGINE Valve Covers
3208 INDUSTRIAL ENGINE Crankcase Ventilator Valves
3208 INDUSTRIAL ENGINE Water Separator
3208 INDUSTRIAL ENGINE Oil Pan
3208 INDUSTRIAL ENGINE Fuel Filter & Fuel Filter Base
3208 INDUSTRIAL ENGINE Water Temperature Regulators
3208 INDUSTRIAL ENGINE Fan Drive
3208 INDUSTRIAL ENGINE Exhaust Manifolds