Rotor Transmission - Install
Installation Procedure
- Attach a suitable lifting device to rotor transmission (18) and install rotor transmission (18) into the machine. The weight of the rotor transmission is approximately 170 kg (375 lb). Install support (22) and bolts (21). Install support (20) and bolts (19) .
Show/hide table
 | |
| Illustration 1 | g01293143 |
- Connect both drive shafts (17) to both ends of rotor transmission (18) .
Show/hide table
 | |
| Illustration 2 | g01292929 |
- Connect linkage (9) and harness assembly (16) to rotor transmission (18) .
- Install clamp assemblies (13) and clamp assemblies (12) .
- Connect hose assemblies (15), hose assemblies (14), hose assemblies (11), and hose assemblies (10) .
- Install support (7), support (6), and the bolts.
Show/hide table
 | |
| Illustration 3 | g01292926 |
- Install access cover (8) and the bolts.
- Install cover (5) and the bolts.
- Connect tube assembly (4) and hose assembly (3) .
Show/hide table
 | |
| Illustration 4 | g01292925 |
- Connect hose assemblies (1) to piston pump (2) .
Show/hide table
 | |
| Illustration 5 | g01292924 |
End By: Install the operator platform. Refer to Disassembly and Assembly, "Slide Platform - Remove and Install".
Caterpillar Information System:
RM-300 Reclaimer Mixer Machine Systems Rotor Transmission - Remove
Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030} Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030}
C15 and C18 Petrolem Generator Set Engines Symptom Troubleshooting
2006/08/07 Correction to Disassembly and Assembly , "Differential Pinion - Assemble" {3254}
M325D L MH and M325D MH Material Handlers Hydraulic System Control Valve (Boom Lowering) - Manual
2006/08/07 Correction to Disassembly and Assembly , "Differential and Bevel Gear - Install" {3254, 3258}
12M, 140M and 160M Motor Graders Hydraulic and Steering System Accumulator (Blade Cushion) - Test and Charge
2006/10/16 Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
M325D L MH and M325D MH Material Handlers Hydraulic System Boom Dampening System
2006/08/14 Improvements to the Boom Assembly {6501}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Oil Sample - Obtain
Three-Point Retractable Seat Belt Cinching{7327} Three-Point Retractable Seat Belt Cinching{7327}
C15 and C18 Petrolem Generator Set Engines Alternator Problem - Charging Problem and/or Noisy Operation
C15 and C18 Petrolem Generator Set Engines Coolant Contains Fuel
572R Series II Pipelayer Specifications
572R Series II Pipelayer Rollover Protective Structure (ROPS) - Inspect
Maintenance Mode Clock Issue for PL300{7606} Maintenance Mode Clock Issue for PL300{7606}
3408E and 3412E Engines for Caterpillar Built Machines Engine Has Mechanical Noise (Knock)
773D and 777D Off-Highway Truck/Tractors Caterpillar Monitoring System System Schematic
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System System Pressure - Release
C4.2 and C6.4 Engines for Caterpillar Built Machines Oil Contains Coolant
3176C, 3406E and 3456 Industrial Engines Oil Contains Fuel
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Final Drive Planetary
2006/09/11 A New Lip Seal is Now Used in the Output Transfer Gear Group {3030}