420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Caterpillar


System Pressure - Release

Usage:

432E BXE

------ WARNING! ------

滚热的油或液压油的压力会对人员造成伤害。

发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。

卸下机具和其油路之前,必须先把机具放到地面上,让油先冷却,才可进行工作。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。


注: 机器上仅允许停留一位操作员。 让其他人员远离车辆或离开操作人员的视野。

  1. 把机器开到平整水平的地方。 使机器远离其它运转机器和人员。

  1. 接合停车制动器。

  1. 将作业机具降至地面。 停止发动机。

  1. 将发动机起动开关钥匙转至接通位置,但是不要起动发动机。

  1. 将液压手动控制移到所有位置以释放液压系统中的压力。

  1. 将发动机起动开关钥匙转至断开位置。

    注: 液压系统里的压力现在已经被释放。 此时可拆卸液压管路和部件。

Caterpillar Information System:

773D and 777D Off-Highway Truck/Tractors Caterpillar Monitoring System System Schematic
3408E and 3412E Engines for Caterpillar Built Machines Engine Has Mechanical Noise (Knock)
Maintenance Mode Clock Issue for PL300{7606} Maintenance Mode Clock Issue for PL300{7606}
572R Series II Pipelayer Rollover Protective Structure (ROPS) - Inspect
572R Series II Pipelayer Specifications
C15 and C18 Petrolem Generator Set Engines Coolant Contains Fuel
C15 and C18 Petrolem Generator Set Engines Alternator Problem - Charging Problem and/or Noisy Operation
RM-300 Reclaimer Mixer Machine Systems Rotor Transmission - Install
RM-300 Reclaimer Mixer Machine Systems Rotor Transmission - Remove
Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030} Filtration Procedure for Articulated Truck Transmission Oil {0680, 0768, 3016, 3030}
C15 and C18 Petrolem Generator Set Engines Symptom Troubleshooting
2006/08/07 Correction to Disassembly and Assembly , "Differential Pinion - Assemble" {3254}
C4.2 and C6.4 Engines for Caterpillar Built Machines Oil Contains Coolant
3176C, 3406E and 3456 Industrial Engines Oil Contains Fuel
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Final Drive Planetary
2006/09/11 A New Lip Seal is Now Used in the Output Transfer Gear Group {3030}
773D and 777D Off-Highway Truck/Tractors Braking System System Schematic
Field Procedure for Replacing the Pivot Bushings for the Truck Body{7258} Field Procedure for Replacing the Pivot Bushings for the Truck Body{7258}
Installation Instructions of the Service Tool Software for the Control Group are Available for Asphalt Compactors {7610, 7620} Installation Instructions of the Service Tool Software for the Control Group are Available for Asphalt Compactors {7610, 7620}
C175-16 Locomotive Engine Cylinder Block, Liners and Heads
2006/09/11 Improved Breather Assemblies for the Swing Drives Are Available {5459}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Striker Bar
2006/08/14 The New Torque Converter Improves Reliability {3101}
2006/08/07 Product Tracking Tool Is Now Available For AccuGrade®, Aquila, CAES, And Minestar® Hardware {7220, 7604, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.