- Caterpillar Products:
- All
Illustration 1 | g01292596 |
Test harness assembly |
Illustration 2 | g01292597 |
Adapter harness assembly |
Illustration 3 | g01292598 |
Adapter harness assembly |
Dealer Service Tools has released a test cable group that the technician can use with Cat Electronic Technician (Cat ET) to check three-wire, active analog circuits that are used in many Caterpillar models. The test cable group was originally designed to test the intake valve actuation pressure sensors in Caterpillar Engines.
The 288-4325 Test Cable Gp consists of one test harness assembly and two adapter harness assemblies that are shown in the illustrations. A light emitting diode (LED) in the test harness assembly indicates the sensor is receiving power. The test harness assembly also sends a voltage signal through the wiring harness that Cat ET can read. The adapter harness assemblies connect either to 3 pin Deutsch connectors or to 3 pin Amp connectors.