CID 0281 FMI 06 Engine Lamp short to ground
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detected a high current condition while attempting to activate the check engine lamp.
System Response:
The check engine lamp may not illuminate.
- There are no performance effects.
Test Step 1. Perform the following diagnostic procedure: Warning Lamp Circuit - Test
Results:
- OK - STOP
Caterpillar Information System:
2006/11/27 An Improved Oil Level Gauge for the Output Transfer Gear Is Used {3159}
Oil Passage in the Cylinder Head{1100, 1102} Oil Passage in the Cylinder Head{1100, 1102}
277C, 287C and 297C Multi Terrain Loaders Hydraulic System Oil - Change
277C, 287C and 297C Multi Terrain Loaders Lower Machine Frame - Clean
AccuGrade® GPS Startup
AccuGrade® GPS Diagnostics - View - Diagnostics Option
AccuGrade® GPS End User License Agreement
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
2007/05/28 Improved Cases for the Operator Console Are Available {5258}
C18 Engines for Caterpillar Built Machines Compression Brake Solenoid Circuit - Test
279C, 289C and 299C Compact Track Loaders Lubricant Viscosities
C175-16 Locomotive Engine Pressure Sensor
C18 Engines for Caterpillar Built Machines CID 0281 FMI 05 Engine Lamp open/short to +batt
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Relief Valve (Torque Converter Inlet)
AccuGrade® GPS GPS Accuracy Mode - Set - GPS Accuracy Option
2006/08/21 A Improved Alternator Guard is Used {7310}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Pitch Cylinder (3-Point Hitch)
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Solenoid Valve (Centershift Lock)
2007/01/15 A New Speed-Timing Sensor is Available {1912}
Bench Test Procedure For A 768C, 769C, 772B, and 773B Off-Highway Truck Torque Converter{3101, 3133} Bench Test Procedure For A 768C, 769C, 772B, and 773B Off-Highway Truck Torque Converter{3101, 3133}
Filtration Procedure for Articulated Truck Steering Oil {0680, 0768, 4304, 4332, 5056, 5057} Filtration Procedure for Articulated Truck Steering Oil {0680, 0768, 4304, 4332, 5056, 5057}
773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) General Information
277C, 287C and 297C Multi Terrain Loaders Final Drive Oil - Change