An Improved Hydraulic Oil Cooler for R1300 and R1300G Load Haul Dump Machines is Now Used {1374}
- Load Haul Dump:
- R1300G (S/N: LJB1-UP)
- R1300GSeries II (S/N: RSL1-UP)
- R1300 (S/N: 6QW1-UP)
Description of Change: An improved hydraulic oil cooler is now used. The new hydraulic oil cooler will improve reliability.
Adaptable To:
Show/hide table
Adaptability     | Effectivity     |
---|---|
S/N:LJB1-1419     | S/N:LJB1420-UP     |
S/N:RSL1-UP     |     |
S/N:6QW1-UP     |     |
Show/hide table
New Part Number     | Description     | Former Part Number     |
351-1248     | Cooler Gp-Hydraulic Oil     | 274-1769     |
Caterpillar Information System:
RM-300 Soil Stabilizer Engine Oil and Filter - Change
AccuGrade® Laser (CB420) MID 114 - CID 2261 - FMI 02
784C and 785C Off-Highway Truck/Tractors Differential and Final Drive Oil - Change
2005/04/25 New Procedures Improve the Consistency of the Fluid Levels {7000}
C11 and C15 Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
793D Off-Highway Truck Differential and Final Drive Breather - Replace
793D Off-Highway Truck Differential Thrust Pin Clearance - Check
RM-300 Soil Stabilizer Engine Air Filter Service Indicator - Inspect
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Machine Preparation for Troubleshooting
RM-300 Soil Stabilizer Engine Air Filter Secondary Element - Replace
793D Off-Highway Truck Torque Converter Oil Filter - Replace
RM-300 Soil Stabilizer Engine Air Filter Primary Element - Clean/Replace
2005/04/25 Improved Engine Software and Improved Monitor Software Now used {7490}
2005/04/18 An Improved Crankshaft is Used {1202}
784C and 785C Off-Highway Truck/Tractors Differential and Final Drive Oil Level - Check
Instructions for Converting Hot Saw to Harvester Head Saw{5051, 5051, 5057, 6543} Instructions for Converting Hot Saw to Harvester Head Saw{5051, 5051, 5057, 6543}
Instructions for Converting Hot Saw to Intermittent Saw {5051, 5051, 5057, 6543} Instructions for Converting Hot Saw to Intermittent Saw {5051, 5051, 5057, 6543}
793D Off-Highway Truck Differential and Final Drive Oil Sample - Obtain
Filtration Procedure for E Series Vibratory Compactors {0680, 0768, 5050, 5056} Filtration Procedure for E Series Vibratory Compactors {0680, 0768, 5050, 5056}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Braking System Pressure Switch (Parking Brake Oil)
ECM Replacement Procedure on 700 Series Articulated Trucks{7610} ECM Replacement Procedure on 700 Series Articulated Trucks{7610}
2005/04/25 Correction to Specifications , "Brake Control Valve (Service)" {4265}
2005/04/18 Replace the Gear when the Sleeve Bearing is Replaced {1212}
2005/04/18 Replace the Gear when the Sleeve Bearing is Replaced {1212, 1234}