New Procedures Improve the Consistency of the Fluid Levels {7000}
- Backhoe Loader:
- 416D (S/N: BFP1-14831)
- 420D (S/N: BLN1-12006; FDP1-23036)
- 430D (S/N: BNK1-6606; BML1-5171)
New procedures to check and top off the coolant fluid level, the engine oil level, and the hydraulic oil level have been implemented. The new procedures verify that each compartment has been filled to the full mark on each indicator when the machine is at operating temperature. Previously, the fluid levels were filled between the low mark and the full mark. The new procedures will ensure that the machines are shipped with fluid levels to the full mark on the indicators. The new procedures became effective in production with the following machines: (S/N: FDP23037-UP), (S/N: BLN12007-UP), (S/N: BNK6607-UP), (S/N: BML5172-UP) and (S/N: BFP14832-UP)
Caterpillar Information System:
C11 and C15 Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
793D Off-Highway Truck Differential and Final Drive Breather - Replace
793D Off-Highway Truck Differential Thrust Pin Clearance - Check
RM-300 Soil Stabilizer Engine Air Filter Service Indicator - Inspect
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Machine Preparation for Troubleshooting
RM-300 Soil Stabilizer Engine Air Filter Secondary Element - Replace
793D Off-Highway Truck Torque Converter Oil Filter - Replace
RM-300 Soil Stabilizer Engine Air Filter Primary Element - Clean/Replace
RM-500 Soil Stabilizer Hydraulic System Return Filter - Replace
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Power Train System Schematic
AP-650B and BG-225C Asphalt Pavers Engine Supplement Engine - Remove
RM-500 Soil Stabilizer Hydraulic Tank Breather - Replace
784C and 785C Off-Highway Truck/Tractors Differential and Final Drive Oil - Change
AccuGrade® Laser (CB420) MID 114 - CID 2261 - FMI 02
RM-300 Soil Stabilizer Engine Oil and Filter - Change
2010/08/02 An Improved Hydraulic Oil Cooler for R1300 and R1300G Load Haul Dump Machines is Now Used {1374}
2005/04/25 Improved Engine Software and Improved Monitor Software Now used {7490}
2005/04/18 An Improved Crankshaft is Used {1202}
784C and 785C Off-Highway Truck/Tractors Differential and Final Drive Oil Level - Check
Instructions for Converting Hot Saw to Harvester Head Saw{5051, 5051, 5057, 6543} Instructions for Converting Hot Saw to Harvester Head Saw{5051, 5051, 5057, 6543}
Instructions for Converting Hot Saw to Intermittent Saw {5051, 5051, 5057, 6543} Instructions for Converting Hot Saw to Intermittent Saw {5051, 5051, 5057, 6543}
793D Off-Highway Truck Differential and Final Drive Oil Sample - Obtain
Filtration Procedure for E Series Vibratory Compactors {0680, 0768, 5050, 5056} Filtration Procedure for E Series Vibratory Compactors {0680, 0768, 5050, 5056}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Braking System Pressure Switch (Parking Brake Oil)