Thickness Control - Remove and Install
Removal Procedure
- Remove the roll pin (1) .
Show/hide table
 | |
| Illustration 1 | g01070314 |
- Remove the handle assembly (2) .
- Remove nuts (3) .
Show/hide table
 | |
| Illustration 2 | g01070317 |
- Remove bearing (4) .
Show/hide table
 | |
| Illustration 3 | g01070319 |
- Remove bolts (5) and spacers (6) .
Show/hide table
 | |
| Illustration 4 | g01070321 |
- Remove bearing block (7) .
- Remove bearing races (8) from bearing block (7) .
Show/hide table
 | |
| Illustration 5 | g01070326 |
- Remove shaft and bearing assembly (9) .
Show/hide table
 | |
| Illustration 6 | g01070327 |
- Remove bolts (10) and spacers (11) .
Show/hide table
 | |
| Illustration 7 | g01070329 |
- Remove trunnion (12) .
Installation Procedure
- Install trunnion (12) .
Show/hide table
| | |
| Illustration 8 | g01070329 |
- Install bolts (10) and spacers (11) .
- Install shaft and bearing assembly (9) .
Show/hide table
| | |
| Illustration 9 | g01070327 |
- Install bearing races (8) in bearing block (7) .
Show/hide table
| | |
| Illustration 10 | g01070326 |
- Install the bearing block (7) .
Show/hide table
| | |
| Illustration 11 | g01070321 |
- Install bolts (5) and spacers (6) .
- Install bearing (4) .
Show/hide table
| | |
| Illustration 12 | g01070319 |
- Install nuts (3) .
Show/hide table
| | |
| Illustration 13 | g01070317 |
- Install handle assembly (2) .
Show/hide table
| | |
| Illustration 14 | g01070314 |
- Install the roll pin (1) .
Caterpillar Information System:
16H Motor Grader Machine Systems Combination Valve - Install
254-0328 Control Gp-Parking Brake (Automatic) For R1600G Load Haul Dump Machines {1408, 4250} 254-0328 Control Gp-Parking Brake (Automatic) For R1600G Load Haul Dump Machines {1408, 4250}
R2900G Load Haul Dump Power Train Bottom Guard (Transmission) - Remove and Install
12M Motor Grader Circle Drive Pinion Teeth - Lubricate
12M Motor Grader Centershift Cylinder Socket - Lubricate
988H Wheel Loader Power Train Engine Support Group
10-20B and 8-16B Extend-A-Mat Screed Power Crown Control
8-16B and 10-20B Extend-A-Mat Screed Shoe (End Gate) - Remove and Install
16H Motor Grader Machine Systems Combination Valve - Remove
C27 and C32 Engines for Caterpillar Built Machines Camshaft
12M Motor Grader Centershift Cylinder Socket - Check/Adjust/Replace
2004/05/03 Special Instruction, SEHS7268, "Installation of Circle Repair Segments" Is Now Available {6152, 6154}
988H Wheel Loader Steering System Articulated Hitch
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Introduction
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Location of Electrical Components
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Location of Hydraulic Components
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Operator Controls
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Vibratory Electrical System
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Hydraulic Tank
8-16B and 10-20B Extend-A-Mat Screed Crown Group - Remove and Install
16H Motor Grader Machine Systems Bank Valve - Remove
PS-360C Paving Compactor Operator Controls
AP-1055B and BG-2455C Asphalt Pavers Vibratory System General Information
12M Motor Grader Circle Top - Lubricate