Bottom Guard (Transmission) - Remove and Install
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Position a suitable jack under transmission guard (1). The weight of transmission guard (1) is approximately
42 kg (92.5 lb) . - Remove six bolts (2). Lower transmission guard (1).
Show/hide table
| |
| Illustration 1 | g01072732 |
- Position a suitable jack under transmission guard (1). The weight of transmission guard (1) is approximately
42 kg (92.5 lb) . - Raise the jack and install six bolts (2).
Show/hide table
|
| |
| Illustration 2 | g01072732 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
12M Motor Grader Circle Drive Pinion Teeth - Lubricate
12M Motor Grader Centershift Cylinder Socket - Lubricate
988H Wheel Loader Power Train Engine Support Group
10-20B and 8-16B Extend-A-Mat Screed Power Crown Control
8-16B and 10-20B Extend-A-Mat Screed Shoe (End Gate) - Remove and Install
16H Motor Grader Machine Systems Combination Valve - Remove
C27 and C32 Engines for Caterpillar Built Machines Camshaft
12M Motor Grader Centershift Cylinder Socket - Check/Adjust/Replace
2004/05/03 Special Instruction, SEHS7268, "Installation of Circle Repair Segments" Is Now Available {6152, 6154}
AP-655C and BG-2255C Asphalt Pavers Machine Systems Track Roller Frame (Rear) - Install
776D, 777D and 777D HAA Off-Highway Truck/Tractors Suspension Cylinder Suspension Cylinder (Rear) - Type 1
16H Motor Grader Machine Systems Hydraulic Tank and Filter - Remove and Install
254-0328 Control Gp-Parking Brake (Automatic) For R1600G Load Haul Dump Machines {1408, 4250} 254-0328 Control Gp-Parking Brake (Automatic) For R1600G Load Haul Dump Machines {1408, 4250}
16H Motor Grader Machine Systems Combination Valve - Install
8-16B and 10-20B Extend-A-Mat Screed Thickness Control - Remove and Install
988H Wheel Loader Steering System Articulated Hitch
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Introduction
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Location of Electrical Components
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Location of Hydraulic Components
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Operator Controls
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Vibratory Electrical System
CB-214E, CB-224E and CB-225E Vibratory Compactors Vibratory System Hydraulic Tank
8-16B and 10-20B Extend-A-Mat Screed Crown Group - Remove and Install
16H Motor Grader Machine Systems Bank Valve - Remove