Track Roller Frame (Rear) - Install
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 说明 | 数量 |
| A | 4C-4089 | 液压平台千斤顶 | 1 |
| 4C-4090 | 处理工具总成 | 1 | |
| B | 1U-7234 | 塞尺 | 1 |
- 安装位于履带支重轮架 (6) 背后的垫片。 将履带支重轮架 (6) 放在工具 (A) 上，如图所示。 将履带支重轮架 (6) 安装到机器上。 履带支重轮架的重量约为 386 kg (850 lb)。
Show/hide table
 | |
| 图 1 | g01071331 |
- 安装垫片 (1) 、板 (2) 和螺栓 (3) 。 使用工具 (B) 测量垫片 (1) 和板 (3) 之间的间隙。 加上或取出垫片，以使垫片和板之间的间隙为 0.5 mm (0.020 in)。
- 安装环 (4) 和螺栓 (5) 。
- 将工具 (A) 从履带支重轮架 (6) 上拆下。
End By: 安装皮带。 请参阅 拆解和组装, "皮带 - 安装"。
Caterpillar Information System:
776D, 777D and 777D HAA Off-Highway Truck/Tractors Suspension Cylinder Suspension Cylinder (Rear) - Type 1
16H Motor Grader Machine Systems Hydraulic Tank and Filter - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Power Train Oil Filter (Power Train)
10-20B and 8-16B Extend-A-Mat Screed Power Sloper and Height Control
834H Wheel Dozer and 836H Landfill Compactor Power Train Temperature Sensor (Torque Converter Oil) (Transmission Lubrication Oil)
C27 and C32 Engines for Caterpillar Built Machines Exhaust Manifold
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Boom Cylinder
3176C and 3196 Engines for Caterpillar Built Machines Flywheel
AP-655C and BG-2255C Asphalt Pavers Machine Systems Track Roller Frame (Rear) - Remove
770 and 772 Off-Highway Truck Fuses - Replace
8-16B and 10-20B Extend-A-Mat Screed End Gate - Remove and Install
992K Wheel Loader and 854K Wheel Dozer Power Train Modulating Valve (Torque Converter Lockup Clutch)
2004/05/03 Special Instruction, SEHS7268, "Installation of Circle Repair Segments" Is Now Available {6152, 6154}
12M Motor Grader Centershift Cylinder Socket - Check/Adjust/Replace
C27 and C32 Engines for Caterpillar Built Machines Camshaft
16H Motor Grader Machine Systems Combination Valve - Remove
8-16B and 10-20B Extend-A-Mat Screed Shoe (End Gate) - Remove and Install
10-20B and 8-16B Extend-A-Mat Screed Power Crown Control
988H Wheel Loader Power Train Engine Support Group
12M Motor Grader Centershift Cylinder Socket - Lubricate
12M Motor Grader Circle Drive Pinion Teeth - Lubricate
R2900G Load Haul Dump Power Train Bottom Guard (Transmission) - Remove and Install
254-0328 Control Gp-Parking Brake (Automatic) For R1600G Load Haul Dump Machines {1408, 4250} 254-0328 Control Gp-Parking Brake (Automatic) For R1600G Load Haul Dump Machines {1408, 4250}
16H Motor Grader Machine Systems Combination Valve - Install