Steering Control Group
Show/hide table
| |
| Illustration 1 | g06131980 |
Show/hide table
| Specification for 503-1433 Steering Control and Mounting Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 138-8454 Screw | Torque to |
| 2 | 6 | Screw | Torque to |
| 3 | 1 | 9X-1046 | Before assembly, apply blue Loctite 243 to the threads. |
| 4 | 1 | 9X-2045 Screw | Torque to |
Show/hide table
| |
| Illustration 2 | g06131954 |
|
239-3666 Steering Control Gp | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 5 | 2 | 149-7370 Abrasion Sleeve | Torque to |
| 6 | 2 | 149-7370 Abrasion Sleeve | Torque to |
Show/hide table
| |
| Illustration 3 | g06132024 |
|
432-6163 STIC Lockout Control Gp | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 7 | 2 | 5C-7261 Nut | Torque to |
| 8 | 1 | 8T-4133 Nut | Before assembly, apply red Loctite 271 to the threads.
Torque to |
| 9 | 1 | 8T-4133 Nut | Before assembly, apply Loctite 271 to the threads.
Torque to |
| 10 | 1 | 8T-4133 Nut | Torque to |
| 11 | 1 | 8C-3442 Coil Spring | Length under test force is Test force is Free length after test is |
Caterpillar Information System:
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Air Cleaner Dust Valve - Clean/Inspect
416F2, 420F2 and 430F2 Backhoe Loaders Engine Air Filter Primary Element - Clean/Replace
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Transmission Oil Filter - Replace
980L Tier 3 Wheel Loader Machine System Loader Frame to Rear Frame - Connect
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Lift and Tilt Cylinder Speed - Check
793D Off-Highway Truck Power Train Drive Shaft (Main)
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager System Schematic
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Calibration Using Electronic Service Tool
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Calibration Using Display Module
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager General Information (Calibration)
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Troubleshooting
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager VIMSpc Payload Reports
CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Engine Supplement Water Separator and Fuel Filter (Primary) - Remove and Install
Felling Head Limiter Crack Repair Procedure {6712} Felling Head Limiter Crack Repair Procedure {6712}
A New Felling Head Limiter Crack Repair Is Now Available for Certain Felling Heads {6712} A New Felling Head Limiter Crack Repair Is Now Available for Certain Felling Heads {6712}
CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Engine Supplement Muffler - Remove and Install
New Gear Assemblies in the Transmission Pump Are Now Used on Certain 793F Off-Highway Trucks {3108, 5073} New Gear Assemblies in the Transmission Pump Are Now Used on Certain 793F Off-Highway Trucks {3108, 5073}
773E Off-Highway Truck Air System and Brakes Air Compressor and Governor - Test and Adjust
An Improved Inner Clutch Seal is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3160} An Improved Inner Clutch Seal is Now Available For Certain 700 C-Series Articulated Trucks {3030, 3160}
2570D and 2670D Wheel Feller Buncher Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Inlet
M325D MH Material Handler Axle Oil Sample - Obtain
2570D and 2670D Wheel Feller Buncher Engine Supplement Nitrogen Oxide Sensor - Remove and Install - Outlet
CCS9 Combination Vibratory Compactor Propel Systems General Information (Propel System)
CCS9 Combination Vibratory Compactor Propel Systems Operator Controls (Propel System)