793D Off-Highway Truck Power Train Caterpillar


Drive Shaft (Main)

Usage:

793D FDB


Illustration 1g00104139

(1) Torque for 16 bolts ... 550 ± 20 N·m (410 ± 15 lb ft)

(A) Compressed drive shaft slip joint ... 1727.2 mm (68.00 inch)

(B) Extended drive shaft slip joint ... 1854.2 mm (73.00 inch)

Caterpillar Information System:

988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager System Schematic
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Calibration Using Electronic Service Tool
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Calibration Using Display Module
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager General Information (Calibration)
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Troubleshooting
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager VIMSpc Payload Reports
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager VIMSpc Software
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Service Tool Software
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Weigh Range Adjusting
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Service Menu
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Totals Menu
988K, 990K, 992K and 994K Wheel Loaders Cat® Production Measurement Application / VIMSTM Network Manager Reweigh Operation
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Lift and Tilt Cylinder Speed - Check
980L Tier 3 Wheel Loader Machine System Loader Frame to Rear Frame - Connect
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Transmission Oil Filter - Replace
416F2, 420F2 and 430F2 Backhoe Loaders Engine Air Filter Primary Element - Clean/Replace
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Air Cleaner Dust Valve - Clean/Inspect
990K Wheel Loader Systems Steering Control Group
CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Engine Supplement Water Separator and Fuel Filter (Primary) - Remove and Install
Felling Head Limiter Crack Repair Procedure {6712} Felling Head Limiter Crack Repair Procedure {6712}
A New Felling Head Limiter Crack Repair Is Now Available for Certain Felling Heads {6712} A New Felling Head Limiter Crack Repair Is Now Available for Certain Felling Heads {6712}
CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Engine Supplement Muffler - Remove and Install
New Gear Assemblies in the Transmission Pump Are Now Used on Certain 793F Off-Highway Trucks {3108, 5073} New Gear Assemblies in the Transmission Pump Are Now Used on Certain 793F Off-Highway Trucks {3108, 5073}
773E Off-Highway Truck Air System and Brakes Air Compressor and Governor - Test and Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.