Control Manifold (Pilot Oil) - Disassemble
Disassembly Procedure
Start By:
- Remove the control manifold.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Cleanliness is an important factor. Before the disassembly procedure is started, clean the exterior of the components to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Note: Put identification marks on components to aid in assembly.
- Remove two O-rings (1) from pilot oil manifold (2) .
Show/hide table
Illustration 1 | g03390622 |
- Remove two bolts (3). Remove solenoid (4) .
Note: Three O-rings (5) are located on each solenoid (4) .
Show/hide table
Illustration 2 | g03390623 |
Show/hide table
Illustration 3 | g03390624 |
- Remove two fittings (6) .
Note: An O-ring is located on each fitting (6) .
Show/hide table
Illustration 4 | g03390625 |
Caterpillar Information System:
Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606} Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606}
2014/10/10 Engine News Article List for <B>S/N:</B>8LL Engines {1000}
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
2013/08/30 A New Adapter Is Used on Certain 3512C Petroleum Engines {1157}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 109-3776 Generator through 109-7874 Generator
374F Excavator Hydraulic System General Information (Return System)
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Sensor Calibration Required - Test
793F and 797F Off-Highway Trucks Braking System Automatic Retarder Control (ARC)
3512C Oil Well Service Engines Air Shutoff - Test
Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605} Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
2013/11/21 An Improved ARD Combustion Head is Now Used on Certain Tier 4 Engines {108B, 108E, 108M}
2013/11/11 An Improved ARD Combustion Head is Now Used on the Tier 4 Engines of Certain Machines {108B, 108E, 108M}
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Nozzle - Assemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Nozzle - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Cannon - Assemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Cannon - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Pump (Stainless Steel) - Assemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Pump (Stainless Steel) - Disassemble
CAT Water Delivery System (WDS) and 785D WTR OEM Off-Highway Truck/Tractor Water Pump (Stainless Steel) - Remove and Install
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Service Tools
C32 Generator Set Plate Locations and Film Locations
Customer Assembly Requirements for C7.1, C4.4, and C3.4B Engines {1000, 108D} Customer Assembly Requirements for C7.1, C4.4, and C3.4B Engines {1000, 108D}
C32 Generator Set Sound Information
2013/06/13 Improved 3412 Marine Bundled Repair Solution Foundational Kits Are Available {1000}