Gear Group (Front)
Show/hide table
| 图 1 | g01473755 |
(4) 曲轴齿轮 (8) 辅助驱动齿轮 | |
(1) 4 只螺栓的扭矩 ... 190 ± 30 N·m (140 ± 22 lb ft)
(2) 用密封的润滑剂稍加润滑 O 形密封圈孔。
(3) 惰轮齿轮组件
- 安装后套筒轴承孔孔径 ... 89.964 ± 0.010 mm (3.5419 ± 0.0004 in)
- 套筒轴承的安装深度 ... 2.3 ± 0.5 mm (0.09 ± 0.02 in)
(5) 前适配器组件
- 安装后套筒轴承孔孔径 ... 75.000 ± 0.055 mm (2.9528 ± 0.0022 in)
(6) 泵适配器
- 安装后套筒轴承孔孔径 ... 75.000 ± 0.055 mm (2.9528 ± 0.0022 in)
- 套筒轴承的安装深度 ... 1.5± 0.5 mm (0.06 ± 0.02 in)
(7) 新惰轮轴直径 ... 89.880 ± 0.020 mm (3.5386 ± 0.0008 in)
(9) 泵适配器
- 安装后套筒轴承孔孔径 ... 94.000 ± 0.055 mm (3.7008 ± 0.0022 in)
- 套筒轴承的安装深度 ... 1.5± 0.5 mm (0.06 ± 0.02 in)
(10) 4 只螺栓的扭矩 ... 190 ± 30 N·m (140 ± 22 lb ft)
(11) 新泵驱动轴直径 ... 74.900 ± 0.015 mm (2.9488 ± 0.0006 in)
Caterpillar Information System:
3500 Engines with EUI Option Flywheel Housing
C15 Petroleum Generator Set Engines Speed/Timing Sensor
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Check Valve
345D, 349D and 349D2 Excavator Machine System Specifications Pump Lines (Main)
345D, 349D and 349D2 Excavators Hydraulic System Electronic Control System
C13T-TH35 and C15T-TH35 Petroleum Packages Plate Locations and Film Locations
C175-16 and C175-20 Generator Set Engines Fuel Control - Test
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Scavenge Pump
3512B SR4B Generator Sets Emergency Stopping
Frequently Asked Questions about Oil Emulsion{1000, 1317, 1348} Frequently Asked Questions about Oil Emulsion{1000, 1317, 1348}
345D, 349D and 349D2 Excavators Hydraulic System Fan Pump (Hydraulic and Radiator Cooling)
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Alternate Exit
2008/03/01 A New Procedure for Installing the Internal Wiring Harness is Now Used {1120, 1408}
C175-16 and C175-20 Generator Set Engines Coolant Temperature Is High
C175-16 and C175-20 Generator Set Engines Coolant Temperature Is Low
C175-16 and C175-20 Generator Set Engines Exhaust Temperature Is High
2008/05/19 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/01 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
345D, 349D and 349D2 Excavators Hydraulic System Boom Drift Reduction Valve
C175-16 and C175-20 Generator Set Engines Exhaust Temperature Is Low
C175-16 and C175-20 Generator Set Engines Inlet Air Temperature Is High
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155} Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
C7 PETROLEUM Petroleum Engine Engine Oil Pump - Assemble