Flywheel Housing
Show/hide table
图 1 | g03835284 |
Show/hide table
技术规格 - 101-1269 飞轮壳总成 | |||
---|---|---|---|
项目 | 数量 | 零件 | 技术规格说明 |
- | - | - | 在安装飞轮壳之前,检查飞轮壳的前端面和缸体的后端面。 这些部件必须没有以下物质:机油、燃油、水、密封垫粘合剂、组装固定胶和任何其他异物。 |
1 | 4 | 9X-8875 螺栓 | 直径为 1/2 inch 的螺栓长度为 拧紧至扭矩为 |
2 | 2 | 6M-9613 螺栓 | 直径为 1/2 inch 的螺栓长度为 拧紧至扭矩为 |
3 | 6 | 9X-8873 螺栓 | 直径为 1/2 inch 的螺栓长度为 拧紧至扭矩为 |
4 | 2 | 9S-1374 螺栓 | 直径为 1/2 inch 的螺栓长度为 拧紧至扭矩为 |
5 | 16 | 1D-4590 螺栓 | 直径为 5/8 inch 的螺栓长度为 拧紧至扭矩为 |
6 | 4 | 8S-9089 螺栓 | 直径为 1/2 inch 的螺栓长度为 拧紧至扭矩为 |
Caterpillar Information System:
C15 Petroleum Generator Set Engines Speed/Timing Sensor
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Check Valve
345D, 349D and 349D2 Excavator Machine System Specifications Pump Lines (Main)
345D, 349D and 349D2 Excavators Hydraulic System Electronic Control System
C13T-TH35 and C15T-TH35 Petroleum Packages Plate Locations and Film Locations
C175-16 and C175-20 Generator Set Engines Fuel Control - Test
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Oil Scavenge Pump
3512B SR4B Generator Sets Emergency Stopping
Frequently Asked Questions about Oil Emulsion{1000, 1317, 1348} Frequently Asked Questions about Oil Emulsion{1000, 1317, 1348}
345D, 349D and 349D2 Excavators Hydraulic System Fan Pump (Hydraulic and Radiator Cooling)
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Alternate Exit
345D, 349D and 349D2 Excavators Hydraulic System Bypass Valve (Return) - Bypass Check Valve
C175-16 and C175-20 Generator Set Engines Gear Group (Front)
2008/03/01 A New Procedure for Installing the Internal Wiring Harness is Now Used {1120, 1408}
C175-16 and C175-20 Generator Set Engines Coolant Temperature Is High
C175-16 and C175-20 Generator Set Engines Coolant Temperature Is Low
C175-16 and C175-20 Generator Set Engines Exhaust Temperature Is High
2008/05/19 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/01 Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
345D, 349D and 349D2 Excavators Hydraulic System Boom Drift Reduction Valve
C175-16 and C175-20 Generator Set Engines Exhaust Temperature Is Low
C175-16 and C175-20 Generator Set Engines Inlet Air Temperature Is High
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155} Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}