Piston Motor - Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Attach a suitable lifting device to piston motor (1). The weight of piston motor (1) is approximately
68 kg (150 lb) . - Position piston motor (1) on the cold planer and install bolts (2).
Show/hide table
| |
| Illustration 1 | g00979419 |
End By:
- Install the cold planer drum. Refer to Disassembly and Assembly, "Cold Planer Drum - Remove and Install".
Caterpillar Information System:
312C and 315C Excavators Tool Control System System G14: Relief Valve (Main) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
312C and 315C Excavators Tool Control System System G14: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
BP24 Pickup Broom Debris Frame
BP24 Pickup Broom Broom Hitch
BP24 Pickup Broom Broom Brush
2003/04/01 New Flash File Software Is Used for Product Link 151/201 {7620}
312C and 315C Excavators Tool Control System System G14: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
SW45, SW60, SW80, SW345B, SW360B, SW380B, SW460B and SW480B Wheel Saws Frame Slide Bars - Lubricate
312C and 315C Excavators Tool Control System System G 1c: Relief Valve (Line) - Test and Adjust - One-Way System
312C and 315C Excavators Tool Control System System G 1b: Relief Valve (Line) - Test and Adjust
312C and 315C Excavators Tool Control System System G 1a: Relief Valve (Line) - Test and Adjust
325C Excavator 3126B Engine Supplement Engine Oil Cooler - Remove and Install
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Piston Motor - Remove
Procedure for Replacement of Air Conditioner Components{7320} Procedure for Replacement of Air Conditioner Components{7320}
5130B Excavator Hydraulic System Control Manifold
3412 Generator Set Engines Disconnect Switch
2003/04/14 Use 216-3914 Track Repair Group to Assemble and Disassemble the Track Assemblies {4170}
304 Mini Hydraulic ExcavatorEngine Supplement and Machine Systems Blade - Remove and Install
M312 Excavator Machine System Wheel Group
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Check Valve - Remove and Install
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Disassemble
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Assemble
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Install
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Remove