Start By:
- Remove the cold planer drum. Refer to Disassembly and Assembly , "Cold Planer Drum - Remove and Install".
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
NOTICE |
---|
Keep all parts clean from contaminants. Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components. To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly. Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination. |
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
- Attach a suitable lifting device to piston motor (1). The weight of piston motor (1) is approximately
68 kg (150 lb) . - Remove bolts (2) and the washers.
- Remove piston motor (1).
Illustration 1 | g00979419 |