Control Manifold - Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Install control manifold (16) in position on the cold planer. Install bolts (15). Tighten bolts (15) to a torque of
14 ± 1 N·m (123.9 ± 8.9 lb in) .Show/hide table
Illustration 2 g00985100 - Connect hose assemblies (14), (13), (12), (11), (10), (9), (8), (7), (6), and (5) to control manifold (16).
Show/hide table
Illustration 3 g00985096 - Connect harness assemblies (4), (3), and (2).
Show/hide table
Illustration 4 g00985091 - Position cover (1) on the cold planer and install the bolts.
Show/hide table
| |
| Illustration 1 | g00985090 |
Caterpillar Information System:
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Assemble
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Disassemble
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Check Valve - Remove and Install
M312 Excavator Machine System Wheel Group
304 Mini Hydraulic ExcavatorEngine Supplement and Machine Systems Blade - Remove and Install
2003/04/14 Use 216-3914 Track Repair Group to Assemble and Disassemble the Track Assemblies {4170}
3412 Generator Set Engines Disconnect Switch
5130B Excavator Hydraulic System Control Manifold
Procedure for Replacement of Air Conditioner Components{7320} Procedure for Replacement of Air Conditioner Components{7320}
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Piston Motor - Remove
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Piston Motor - Install
312C and 315C Excavators Tool Control System System G14: Relief Valve (Main) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Remove
M313C Wheeled Excavator Machine System Bucket Cylinder
320C Excavator Machine System Specifications Stick
385B Excavator Hydraulic System Oil Sample - Obtain
385B Excavator Swing Drive Oil Sample - Obtain
385B Excavator Engine Oil Sample - Obtain
304 Mini Hydraulic ExcavatorEngine Supplement and Machine Systems Blade Cylinder - Remove and Install
303 CR Mini Hydraulic Excavator Engine Supplement Shutoff Solenoid - Remove and Install
2003/04/07 New Plugs for the Main Hydraulic Control Valve Are Available {5051}
M315C Excavator Hydraulic System Main Hydraulic Pump Air - Purge
M315C Excavator Hydraulic System Swing Pump Air - Purge
321C CR Excavator Tool Control System System 3: One-Way/Two Pump/Foot Switch