Balancer Group - Remove
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件说明 | 数量 |
A | 1P-2321 | 组合式拉拔器 | 1 |
9S-9153 | 拉拔器爪 | 3 | |
B | 1P-0510 | 冲头总成 | 1 |
开始:
- 拆下飞轮壳体。 请参阅拆解和组装, "飞轮壳体 - 拆卸和安装"。
- 松开四条螺栓 (1)。 松开螺栓大约
6.4 mm (0.25 in) 。 利用工具 (A) 将凸轮轴齿轮 (2) 从凸轮轴上拉出。 定位平衡齿轮 (3)。 拆下四条螺栓 (1) 后拆下凸轮轴后齿轮 (2)。Show/hide table图 2 g00832528 - 拆下螺栓 (4)、板 (5) 和平衡齿轮 (3)。
- 检查平衡齿轮 (3) 内的轴承。 新轴承孔为
50.853 mm (2.002 in) 到50.950 mm (2.006 in) 。Show/hide table图 3 g00832547 - 利用工具 (B) 和压具将轴承从平衡齿轮 (3) 上拆下。
Show/hide table
图 4 g00832531 - 检查轴 (6) 是否磨损或损坏。 新轴的外径为
50.787 mm (1.9995 in) 到50.813 mm (2.0005 in) 。 - 如果必须更换轴 (6),则拆下螺栓 (7)。
Show/hide table
图 1 | g00833337 |
Caterpillar Information System:
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil - Check
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Radiator - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Temperature Switch (Axle Oil)
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil - Change
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Sample - Obtain
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Level - Check
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Fan Drive - Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 03
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Transmission Oil Level - Check
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil - Change
TL5 Series Field Cultivator Troubleshooting
2001/10/15 A New Owners Manual is Now Available {1000, 7000}
3408E and 3412E Engines for Caterpillar Built Machines Balancer Group - Install
TH350B, TH355B, TH360B and TH460B Telehandlers Battery Disconnect Switch - If Equipped
740 and 740 EJECTOR Articulated Trucks Power Train Output Transfer Gears - Assemble
TL5 Series Field Cultivator Transporting the Implement
2001/11/26 New Control Software for the Chassis ECM is Used {7620}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 05
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Engine and Torque Converter - Install
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge
A Process is Available to Replace the Propel Lever Group{3209, 5462} A Process is Available to Replace the Propel Lever Group{3209, 5462}
TL5 Series Field Cultivator Bearings - Lubricate
TL5 Series Field Cultivator Hydraulic Cylinders - Phasing
2001/11/19 New Clutch Discs with Improved Friction Material are Used for Improved Service Life {3030, 3160, 3187}