Final Drive Planetary (Drum) Oil - Check
Show/hide table
Illustration 1 | g00365518 |
The final drive planetary for the drum is located on the left side of the drum.
- Rotate the drum until plug (1) is located at the 90 degree position.
- Remove the level check plug. Check the level of the oil in the planetary. Maintain the level of the oil at the bottom of the level check plug opening.
Show/hide table
Illustration 3 g00365520 - If the oil level is low, remove fill/drain plug (2).
- In order to maintain the proper oil level, add oil.
- Clean the plugs and install the plugs.
Show/hide table
Illustration 2 | g00365519 |
Caterpillar Information System:
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Radiator - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Power Train Temperature Switch (Axle Oil)
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil - Change
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Sample - Obtain
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil Level - Check
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Fan Drive - Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 03
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Transmission Oil Level - Check
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Axle) Oil - Change
TL5 Series Field Cultivator Troubleshooting
2001/10/15 A New Owners Manual is Now Available {1000, 7000}
CP-563C and CS-563C Vibratory Compactors Cutting Edges (Leveling Blade) - Inspect/Replace
3408E and 3412E Engines for Caterpillar Built Machines Balancer Group - Remove
3408E and 3412E Engines for Caterpillar Built Machines Balancer Group - Install
TH350B, TH355B, TH360B and TH460B Telehandlers Battery Disconnect Switch - If Equipped
740 and 740 EJECTOR Articulated Trucks Power Train Output Transfer Gears - Assemble
TL5 Series Field Cultivator Transporting the Implement
2001/11/26 New Control Software for the Chassis ECM is Used {7620}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 05
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Engine and Torque Converter - Install
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge
A Process is Available to Replace the Propel Lever Group{3209, 5462} A Process is Available to Replace the Propel Lever Group{3209, 5462}
TL5 Series Field Cultivator Bearings - Lubricate
TL5 Series Field Cultivator Hydraulic Cylinders - Phasing