SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP Caterpillar


Fuel Injector Rocker Arms And Lifters

Usage:

(1) Bore in rocker arm bearing for shaft (new) ... 24.808 ± 0.020 mm (.9767 ± .0008 in)

Diameter of shaft (new) ... 24.755 ± 0.010 mm (.9746 ± .0004 in)

Holes in bearing must be aligned with holes in rocker arm.

(2) Torque for locknut ... 25 ± 7 N·m (18 ± 5 lb ft)

(3) Fuel timing dimension. For the correct dimension to use, see the Engine Information Plate or Fuel Setting And Related Information Fiche.

(4) Bore in lifter arm for shaft (new) ... 15.670 ± 0.013 mm (.6169 ± .0005 in)

Diameter of shaft (new) ... 15.620 ± 0.012 mm (.6150 ± .0005 in)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.