SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP Caterpillar


Fuel Filter Lines Group

Usage:


As Viewed From Front Of Engine.

(1) Cylinder head.

(2) Tube assembly (fuel return to tank).

(3) Tube assembly (fuel transfer pump to fuel filter).

(4) Check valve assembly (maintains minimum fuel system pressure).

Minimum at low idle ... 50 kPa (7.2 psi)

NOTE: Refer to the Testing and Adjusting Section of this Service Manual, for the procedure to check the fuel pressure.

(5) Fuel outlet port.

(6) Screen assembly.

(7) Fuel inlet port.

(8) Fuel gallery.

(9) Pressure regulating orifice

Maintains fuel system pressure as follows:

Maximum at rated rpm ... 400 kPa (58 psi)

Manimum at rated rpm ... 200 kPa (29 psi)

NOTE: The pressure regulating orifice is a drilled passage in tube assembly (2).

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.