SERVICE MANUAL - 3116 DIESEL TRUCK ENGINE 7SF1-UP Caterpillar


Fuel Injector

Usage:

(1) Bolt. Tighten to a torque of ... 12 ± 4 N·m (9 ± 3 lb ft)

(2) O-ring.

(3) Injector group.

(4) O-ring.

NOTE: Before installing an injector, lubricate O-ring seals with clean engine oil. Install the injector according to the procedure in the Disassembly And Assembly Section of this Service Manual. Check and/or adjust the following: injector synchronization, fuel setting, fuel timing, and valve clearance, according to the procedures given in the Testing And Adjusting Section of this Service Manual.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.