Usage:
(1) Angle drive adapter assembly.
(2) O-ring:
Put clean engine oil or glycerin on the O-ring seal at assembly.
(3) Seal:
Install seal in cover (8) with the lip of the seal toward bearing (4) as shown. Put clean engine oil on the lip of the seal after it is installed.
(4) Bearing.
(5) Tachometer drive shaft.
(6) Tachometer drive adapter.
(7) Camshaft drive gear. See Rear Gear Groups in this section for the correct timing and installation procedure to use.
(8) Tachometer drive cover (LH rear of engine).
4W5267 Tachometer Drive Group.
(1) Angle drive adapter assembly.
(2) O-ring:
(3) Seal:
Install seal in cover (8) with the lip of the seal toward bearing (4) as shown. Put clean engine oil on the lip of the seal after it is installed.
(4) Bearing.
(5) Tachometer drive shaft.
(6) Tachometer drive adapter.
(7) Camshaft drive gear. See Rear Gear Groups in this section for the correct timing and installation procedure to use.
(8) Tachometer drive cover.