Spark Plug Adapters
Usage:
Remove And Install Spark Plug Adapters
start by:
a) remove spark plugs
1. Drain the coolant from the cooling system to a level below the cylinder head.
2. Use tool (A) to remove the spark plug adapters (1) and gaskets.
3. Install a new seal (3) and gasket (2) on each of the spark plug adapters (1). Put liquid soap on the seal and in the bore of the cylinder head. Put 5P3931 Anti-Seize Compound on the threads of the spark plug adapters.
4. Install the spark plug adapters in the cylinder head. Use tool (A) to tighten the adapters to a torque of 70 ± 5 lb.ft. (95 ± 7 N·m).
5. Fill the cooling system with coolant to the correct level.
end by:
a) install spark plugs
Caterpillar Information System:
3306 NATURAL GAS ENGINE Spark Plugs
3306 NATURAL GAS ENGINE Carburetor
3306 NATURAL GAS ENGINE Gas Pressure Regulator
3306 NATURAL GAS ENGINE Turbocharger
3306 NATURAL GAS ENGINE Boost Control Valve
3306 NATURAL GAS ENGINE Air Cleaner
3306 NATURAL GAS ENGINE General Instructions
3406 DIESEL TRUCK ENGINE Oil Pump (Brakesaver)
3406 DIESEL TRUCK ENGINE Oil Pan (Brakesaver)
3406 DIESEL TRUCK ENGINE Brakesaver
3406 DIESEL TRUCK ENGINE Brakesaver Control Valve
3406 DIESEL TRUCK ENGINE Flywheel (Brakesaver)
3306 NATURAL GAS ENGINE Instrument Panel
3306 NATURAL GAS ENGINE Aftercooler
3306 NATURAL GAS ENGINE Water Temperature Regulator
3306 NATURAL GAS ENGINE Water Pump
3306 NATURAL GAS ENGINE Auxiliary Pump (Fresh Water)
3306 NATURAL GAS ENGINE Service Meter
3306 NATURAL GAS ENGINE Accessory Drive
3306 NATURAL GAS ENGINE Magneto
3306 NATURAL GAS ENGINE Magneto Drive
3306 NATURAL GAS ENGINE Governor And Governor Drive
3306 NATURAL GAS ENGINE Governor
3306 NATURAL GAS ENGINE Governor Drive