Water Temperature Regulator
Usage:
Remove Water Temperature Regulator
1. Drain the coolant from the cooling system below the level of the water temperature regulator.
2. Remove bolts (2) and clip (3).
3. Remove pipe (1) and gasket from the cylinder head.
4. Remove water temperature regulator (4).
Install Water Temperature Regulator
1. Put the water temperature regulator (1) into position in the cylinder head.
2. Install a new gasket and pipe (2) over the water temperature regulator.
3. Install clip (3) and bolts that hold pipe (2) in place.
4. Fill the cooling system with coolant to the correct level.
Caterpillar Information System:
3306 NATURAL GAS ENGINE Aftercooler
3306 NATURAL GAS ENGINE Instrument Panel
3306 NATURAL GAS ENGINE Spark Plug Adapters
3306 NATURAL GAS ENGINE Spark Plugs
3306 NATURAL GAS ENGINE Carburetor
3306 NATURAL GAS ENGINE Gas Pressure Regulator
3306 NATURAL GAS ENGINE Turbocharger
3306 NATURAL GAS ENGINE Boost Control Valve
3306 NATURAL GAS ENGINE Air Cleaner
3306 NATURAL GAS ENGINE General Instructions
3406 DIESEL TRUCK ENGINE Oil Pump (Brakesaver)
3406 DIESEL TRUCK ENGINE Oil Pan (Brakesaver)
3306 NATURAL GAS ENGINE Water Pump
3306 NATURAL GAS ENGINE Auxiliary Pump (Fresh Water)
3306 NATURAL GAS ENGINE Service Meter
3306 NATURAL GAS ENGINE Accessory Drive
3306 NATURAL GAS ENGINE Magneto
3306 NATURAL GAS ENGINE Magneto Drive
3306 NATURAL GAS ENGINE Governor And Governor Drive
3306 NATURAL GAS ENGINE Governor
3306 NATURAL GAS ENGINE Governor Drive
3306 NATURAL GAS ENGINE Oil Filter Base
3306 NATURAL GAS ENGINE Engine Oil Cooler
3306 NATURAL GAS ENGINE Vibration Damper And Pulley