Cylinder Liner
Usage:
For installation:
a. Put liquid soap on grooves and seals on lower part of liner.
b. Put a 6N2841 Filler Band completely in diesel fuel for a moment.
c. Install the band (3) around the groove under the liner flange, without delay.
d. Put engine oil on band.
e. Install the liner in the cylinder block immediately, before expansion of the band.
(1) Bore in liner (new) ... 6.251 ± .001 in.(158.75 ± 0.03 mm)
"Use again" maximum bore (when measured near upper end of the wear surface of the cylinder liner) ... 6.256 in.(158.90 mm)
(2) Thickness of flange on liner ... .5050 ± .0008 in.(12.827 ± 0.020 mm)
(3) Filler Band.
Caterpillar Information System:
D353 INDUSTRIAL & MARINE ENGINES Cylinder Block (Without Spacer Plate)
D353 INDUSTRIAL & MARINE ENGINES Cylinder Block (With Spacer Plate)
D353 INDUSTRIAL & MARINE ENGINES Pressure Cap For The Cooling System (6L9850)
D353 INDUSTRIAL & MARINE ENGINES Water Pump (2N5649)
D353 INDUSTRIAL & MARINE ENGINES Regulator For Water Temperature (6L6108)
D353 INDUSTRIAL & MARINE ENGINES Turbocharger Lubrication Valve
D353 INDUSTRIAL & MARINE ENGINES Oil Cooler And Filter
D353 INDUSTRIAL & MARINE ENGINES Drive For The Oil Pump
D353 INDUSTRIAL & MARINE ENGINES Oil Pump
D353 INDUSTRIAL & MARINE ENGINES Turbocharger (Schwitzer 4HD755)
D353 INDUSTRIAL & MARINE ENGINES Camshaft
D353 INDUSTRIAL & MARINE ENGINES Valve Rocker Arms And Lifters
D353 INDUSTRIAL & MARINE ENGINES Cylinder Liner Projection (With Spacer Plate)
D353 INDUSTRIAL & MARINE ENGINES Cylinder Liner Projection (Without Spacer Plate)
D353 INDUSTRIAL & MARINE ENGINES Connecting Rod
D353 INDUSTRIAL & MARINE ENGINES Pistons And Rings (With Keystone Piston Ring Groove)
D353 INDUSTRIAL & MARINE ENGINES Pistons And Rings
D353 INDUSTRIAL & MARINE ENGINES Crankshaft
D353 INDUSTRIAL & MARINE ENGINES Flywheel
D353 INDUSTRIAL & MARINE ENGINES Vibration Damper
D353 INDUSTRIAL & MARINE ENGINES Flywheel Housing
D353 INDUSTRIAL & MARINE ENGINES Flywheel Runout
D353 INDUSTRIAL & MARINE ENGINES Flywheel Housing Runout
D353 INDUSTRIAL & MARINE ENGINES Flywheel Housing Bore