Engine Shut Down
Usage:
Before stopping the engine, operate at low load for 5 minutes, then at low idle for 30 seconds. (This procedure allows hot areas in the engine to cool gradually, extending the engine life.)
TO STOP THE ENGINE, DO ONE OF THE FOLLOWING, DEPENDING ON TRUCK ARRANGEMENT.
NOTE: Make sure the shut-off procedure is understood. Refer to the truck manufacturer's instructions for the shut-off system used.
- 1. Turn the key to the spring-loaded position and hold until engine stops, then release key, or
- 2. Pull out the manual shut-off control, or
- 3. Push in and hold stop button until engine stops, then release button.
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Engine Operation
1674 DIESEL TRUCK ENGINE Gauges
1674 DIESEL TRUCK ENGINE Starting The Engine
1674 DIESEL TRUCK ENGINE Before Starting Engine
1674 DIESEL TRUCK ENGINE Reconditioned Engines
1674 DIESEL TRUCK ENGINE New Engine Operation
1674 DIESEL TRUCK ENGINE Safety Precautions
1674 DIESEL TRUCK ENGINE General Information
1674 DIESEL TRUCK ENGINE Emergency Service
1674 DIESEL TRUCK ENGINE Foreword
G343 INDUSTRIAL ENGINE Miscellaneous Maintenance
G343 INDUSTRIAL ENGINE Power Coupling System
1674 DIESEL TRUCK ENGINE Cold Weather Operation
1674 DIESEL TRUCK ENGINE Altitude Operation
1674 DIESEL TRUCK ENGINE Storage
1674 DIESEL TRUCK ENGINE Daily Care And Report
1674 DIESEL TRUCK ENGINE Specifications
1674 DIESEL TRUCK ENGINE Performance Curves
1674 DIESEL TRUCK ENGINE Lubrication Specifications
1674 DIESEL TRUCK ENGINE Fuel Specifications
1674 DIESEL TRUCK ENGINE Coolant Specifications
1674 DIESEL TRUCK ENGINE Introduction
1674 DIESEL TRUCK ENGINE Lubrication And Maintenance Chart
1674 DIESEL TRUCK ENGINE Lubrication Instructions