1674 DIESEL TRUCK ENGINE Caterpillar


Gauges

Usage:

After the engine starts, and at frequent intervals while the engine is operating, the gauges should be observed for proper readings.

Fuel

Indicates the level of fuel in the tank. Electrically operated, it registers only when the key switch is ON.

Fuel Pressure

Indicator should register approximately 30 PSI (NORMAL) at engine high idle. When the indicator drops below approximately 25 PSI, wash primary fuel filter and replace final filter.

Ammeter

Indicates the rate of battery charge or discharge.

Tachometer

Indicates engine RPM. The engine can be operated between rated speed and high idle without damage, but should not be allowed to overspeed (such as when going downhill).

Oil Pressure

Registers between 45 and 60 psi when the engine is running at rated engine speed with oil at operating temperature. A lower pressure (10 psi minimum) is normal at lower idling speeds. If no pressure is indicated, stop engine immediately.

Water Temperature

Normally registers between 170° (77°C) and 195°F (90°C). Somewhat higher temperatures may be experienced under certain conditions. Maximum allowable temperature 210°F (99°C).

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.